Search found 15 matches
- Thu May 11, 2017 7:51 am
- Forum: Help on using FreeCAD
- Topic: How to use objects from another FCStd file ?
- Replies: 9
- Views: 8394
Re: How to use objects from another FCStd file ?
Hello there, .... I was thinking it would be better to design each element (e.g. cabinets, fuirnitures etc) in a separate FCStd document and then to put them all together as ready-objects in my master-plan. Hi ti178, As microelly2 says already the assembly2 workbench allows you to bring parts toget...
- Thu Mar 30, 2017 9:22 am
- Forum: Help on using FreeCAD
- Topic: Creating mould from Parts ?
- Replies: 3
- Views: 4881
Re: Creating mould from Parts ?
Hi JPL, Gonna take a stab at answering this ..... If my suggestion that follows is wrong almost certainly one of the heavyweights here will point it out :) But that said...what I'd do is.... Create a clone of your part with the draft workbench. (See note below) Turn off (make invisible) your origina...
- Tue Mar 28, 2017 2:35 pm
- Forum: Users Showcase
- Topic: Architecture work in FreeCAD
- Replies: 111
- Views: 61722
Re: Architecture work in FreeCAD
regis,
I gotta ask, cos I certainly aint no architect.
How tall have you gotta be to reach those handles on those top cupboards ?
Or is this just FreeCad being playful !
I gotta ask, cos I certainly aint no architect.
How tall have you gotta be to reach those handles on those top cupboards ?
Or is this just FreeCad being playful !
- Fri Mar 17, 2017 1:05 pm
- Forum: Help on using FreeCAD
- Topic: Change step up step down.
- Replies: 3
- Views: 1004
Re: Change step up step down.
Hi hobbyhands, Welcome to the forum. Without screenshots or a file this is really hard to answer. And.... Before some of the heavyweights on here (Who i'm certain will know instantly) even look to give you and answer they will want to know. Version number, operating system, libaries etc etc. See the...
- Wed Mar 01, 2017 12:53 pm
- Forum: Help on using FreeCAD
- Topic: Pocket visibility, external geometry and linear repetion
- Replies: 7
- Views: 1978
Re: Pocket visibility, external geometry and linear repetion
Hi ChristouB, /beaten to it again by bejant/ If thats your screenshot then you have everything visible. You have: Pocket , Pocket001, and Pocket002 visible at the same time, along with all the LinearPatterns Turn off the underlying stuff, Pocket , Pocket001, by selecting them in the treeview and pre...
- Wed Feb 22, 2017 1:07 pm
- Forum: Help on using FreeCAD
- Topic: Is there a way to show fasteners in drawings?
- Replies: 20
- Views: 4618
Re: Is there a way to show fasteners in drawings?
KinOz, Bugger! - Just noticed that NormandC basically wrote the same thing. Sorry NormandC I was so excited that I could actually help cos I knew the answer I just didnt see your answer. I use Assembly2 and the Fasteners workbenches. (On version 16 - Im not at it atm so cant state the exact version ...
- Tue Feb 21, 2017 5:53 pm
- Forum: Users Showcase
- Topic: Vintage Steam Tractor Miniature
- Replies: 13
- Views: 9600
Re: Vintage Steam Tractor Miniature
This is just wicked !
Well done.
Well done.
- Wed Feb 01, 2017 10:33 am
- Forum: Help on using FreeCAD
- Topic: How to fix a part when using Assembly 2 workbench
- Replies: 2
- Views: 3943
Re: How to fix a part when using Assembly 2 workbench
Hallo, Often when I apply the costraint (both planes or axial) the board is moved instead the component. When this occurs the change is also not reversible i.e. clicking into UNDO will not reset the design. Hi, Just a quick note here as I've been using Assembly 2 for a fair bit now. The first part ...
- Wed Jan 11, 2017 1:56 pm
- Forum: Users Showcase
- Topic: Sunglasses
- Replies: 5
- Views: 4460
Re: Sunglasses
Wow, really good. And thats just a test drive !
- Tue Dec 20, 2016 5:01 pm
- Forum: Open discussion
- Topic: Which Mouse ?
- Replies: 6
- Views: 2470
Re: Which Mouse ?
I really liked that Space Navigator, Jee-Bee... right up till I saw the price !
I suppose what I was getting at is does anyone use more than 3 buttons for FreeCad, is it worth getting a 5 button etc.
I suppose what I was getting at is does anyone use more than 3 buttons for FreeCad, is it worth getting a 5 button etc.