appimage
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: appimage
I made a quick test and created the AppImage on Ubuntu 16.04. I don't detect such issue.
Re: appimage
NormandC wrote:Last week I tried to build an AppImage of freecad-daily. The AppImage binary is created, but when I launch it I get this error:
Works with no problems for me on Kubuntu 14.04triplus wrote:I made a quick test and created the AppImage on Ubuntu 16.04. I don't detect such issue.
I uploaded it to https://github.com/FreeCAD/FreeCAD/rele ... g/0.17_pre
I left the old one in case there is a problem.
Anybody got a moment to test?
"fight the good fight"
Re: appimage
triplus wrote:I made a quick test and created the AppImage on Ubuntu 16.04. I don't detect such issue.
Thank you both for checking.sgrogan wrote:Works with no problems for me on Kubuntu 14.04
What the heck is wrong with my config then.
It works here.sgrogan wrote:Anybody got a moment to test?
Its FreeCAD info:
OS: Ubuntu 16.04.2 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.10600 (Git)
Build type: None
Branch: master
Hash: 4d9169faf778e9716fc647fb3fcf46462b5d99a4
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
Re: appimage
Well there is always a chance you are doing it differently.
Re: appimage
What could I have possibly done differently when all that is required is to copy-paste the two same commands posted here that you and sgrogan have most probably used?
https://forum.freecadweb.org/viewtopic. ... 20#p152068
I used the FreeCAD-nightly recipe.
EDIT: is the path where the AppImage is built important? I built it in a sub-folder 3 levels below my Home folder. There were no special characters in the path. The error message seems to indicate it cannot find the local python path...
https://forum.freecadweb.org/viewtopic. ... 20#p152068
I used the FreeCAD-nightly recipe.
EDIT: is the path where the AppImage is built important? I built it in a sub-folder 3 levels below my Home folder. There were no special characters in the path. The error message seems to indicate it cannot find the local python path...
Re: appimage
... And that was it.NormandC wrote:EDIT: is the path where the AppImage is built important? I built it in a sub-folder 3 levels below my Home folder.
After building a new AppImage directly in $HOME, I can launch the binary.
Thank you triplus for asking the obvious question...
Re: appimage
You're welcome.NormandC wrote:Thank you triplus for asking the obvious question...
Re: appimage
Bug: Clicking on any hyperlink in FC to fire up browser will fail. I can't seem to find where to set the correct path to the browser from within FC.
Running latest appimage FreeCAD-0.17.git201703220057.glibc2.17-x86_64.AppImage
Error:
Running latest appimage FreeCAD-0.17.git201703220057.glibc2.17-x86_64.AppImage
Code: Select all
OS: "Manjaro Linux"
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.10600 (Git)
Build type: None
Branch: master
Hash: 4d9169faf778e9716fc647fb3fcf46462b5d99a4
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
Code: Select all
Failed to execute default Web Browser.
input/output error
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: appimage
In addition to the above issue, I added a Feature Request issue #2987 so that FC recognizes when it's been built by as an Appimage.
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: appimage
Can't reproduce on Ubuntu 16.04 LTS.Kunda1 wrote:Bug: Clicking on any hyperlink in FC to fire up browser will fail
What about a self-compiled FreeCAD? Does it show the same problem?
AFAICT this is a simple html page with href tags.
https://github.com/FreeCAD/FreeCAD/blob ... e.html#L61
Not sure what the "ext" prefix is supposed to do though. Open in an external browser?
Might be related:
http://stackoverflow.com/questions/5116 ... lt-browser
http://askubuntu.com/questions/8252/how ... e-terminal