What dose the following mean and how do I fix it?
POCKET: LIST INDEX OUT OF RANGE
Thank you
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6700 (Git)
Build type: Release
Branch: releases/FreeCAD-0-16
Hash: 7b925d11aa69ac405b423635adb1e2833f18a817
Python version: 2.7.8
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
Pocket error
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- sliptonic
- Veteran
- Posts: 3459
- Joined: Tue Oct 25, 2011 10:46 pm
- Location: Columbia, Missouri
- Contact:
Re: Pocket error
Hmm, I believe it means a index is out of rangeXXX wrote:What dose the following mean and how do I fix it?
POCKET: LIST INDEX OUT OF RANGE
Seriously, it's not enough to go on. Can you post a file? Some steps to reproduce? A screenshot?
Re: Pocket error
Well, that's the message it gave me.
This is the Path WB->Created Project->Setup Tool->Loaded Tool->Identified Tool Number (and RPM)->Created a Path Pocket->Got Error.
I'll attach the CAD file.
Thanks
This is the Path WB->Created Project->Setup Tool->Loaded Tool->Identified Tool Number (and RPM)->Created a Path Pocket->Got Error.
I'll attach the CAD file.
Thanks
- Attachments
-
- Perpendicular cover mold.FCStd
- (349.57 KiB) Downloaded 58 times
- sliptonic
- Veteran
- Posts: 3459
- Joined: Tue Oct 25, 2011 10:46 pm
- Location: Columbia, Missouri
- Contact:
Re: Pocket error
Repeated (as close as I could and got a path)
I'm not sure the path is what you're looking for since pocket can't handle the sloped bottom face, yet. For that, we'll need a much improved surface operation.
revised file attached
OS: Linux Mint 18 Sarah
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.8247 (Git)
Build type: Unknown
Branch: master
Hash: b20dd3f7ab8aa2145dc1e7c3a4daa621c2e956ba
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
I'm not sure the path is what you're looking for since pocket can't handle the sloped bottom face, yet. For that, we'll need a much improved surface operation.
revised file attached
OS: Linux Mint 18 Sarah
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.8247 (Git)
Build type: Unknown
Branch: master
Hash: b20dd3f7ab8aa2145dc1e7c3a4daa621c2e956ba
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
- Attachments
-
- Perpendicular cover mold.FCStd
- (382.36 KiB) Downloaded 56 times
-
- Selection_001.png (131.11 KiB) Viewed 2474 times
Re: Pocket error
Oh! I didn't realize Path wasn't capable of 2.5D yet.
Thanks for the help.
Thanks for the help.
- sliptonic
- Veteran
- Posts: 3459
- Joined: Tue Oct 25, 2011 10:46 pm
- Location: Columbia, Missouri
- Contact:
Re: Pocket error
Well, surface is capable of some 2.5d stuff but only operating on the entire solid. It isn't smart enough (yet) to work on a single face. I don't think this would be too hard but will require additional work.