Hi,
I have used the Involute Gear part design extruded to 14 mm and had a Gcode of the profile made on version 0.16.
When trying the same on version 0.17, I get some very large circles and odd looking flower arrangement on the paths
1. Using Part Design, make 36 teeth mod 2.5 Involute gear.
2. Using Part, extrude to 14 mm.
3. Make Path Job (Extrude as base object) and create a 3mm endmill tool.
4. Select 3mmEndMill.
5. Select Extrude object and do contour or profile on the base object.
Has anyone successfully made a GCode profile of an Involute gear on version 0.17 ?
OS: Ubuntu 16.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.9802 (Git)
Build type: None
Branch: master
Hash: bef81531eeb61b31d23b9603364511b76f1f9633
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
Thanks,
Lasse
Profile path on an Involute Gear on version 0.17
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Profile path on an Involute Gear on version 0.17
Unfortunately your build is exactly one commit before the fix for that. Profile got broken a while ago and we fixed it yesterday.
Re: Profile path on an Involute Gear on version 0.17
, so if I get the latest tomorrow, the fix will be included ?
Thanks,
Lasse
Thanks,
Lasse
Re: Profile path on an Involute Gear on version 0.17
I sure hope solassets wrote:, so if I get the latest tomorrow, the fix will be included ?
Re: Profile path on an Involute Gear on version 0.17
just to make sure I tried it on my local build (don't wanna be responsible for ruining someone's weekend milling):
Re: Profile path on an Involute Gear on version 0.17
Excellent, many thanks.
Cant wait to try it out!
Thanks,
Lasse
Cant wait to try it out!
Thanks,
Lasse
Re: Profile path on an Involute Gear on version 0.17
PERFECT!
It works!
To the Garage!
Many thanks!
Lasse
It works!
To the Garage!
Many thanks!
Lasse
Re: Profile path on an Involute Gear on version 0.17
Would you mind showing a picture of the result here or in the showcase section of the forum?lassets wrote:PERFECT!
It works!
To the Garage!
Many thanks!
Lasse
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.