I saw there is some inconsistence with the FEM constraints.
I show in these figures.
The first is of the fixed constraint
the second is from the force constraint
the problem i have is that after making a constraint i can't delete it. i have to remove the force and make a new one. could in this case add a remove button or give this some difficulties?
I saw that the force constraint was the only one that doesn't have the remove button...
and FreeCAD version is:
OS: Mac OS X
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.9244 (Git)
Build type: Release
Branch: (detached from 6d1eddc)
Hash: 6d1eddc22f9f3176cea96b34d5002e84e29550d4
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 3.1.3
OCC version: 7.0.0
Don't know if this has changed in a newer version...
Inconsistence for FEM constraints
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Re: Inconsistence for FEM constraints
Yes there are some different Task panels around. If you would like to remove a force from force constraint you should right click on the reference. In the case of you picture you should right click on "Box:Face6" and press delete. Does it work for you?
OS: Debian GNU/Linux 8.7 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.9769 (Git)
Build type: Unknown
Branch: master
Hash: 72c7a8ab00e37ee2d5f58e1902229e860a059dcc
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.0.0
OS: Debian GNU/Linux 8.7 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.9769 (Git)
Build type: Unknown
Branch: master
Hash: 72c7a8ab00e37ee2d5f58e1902229e860a059dcc
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.0.0
Re: Inconsistence for FEM constraints
BTW: your FreeCAD is quite outdated in the regard of FEM 0.17.9769 is up to date !Jee-Bee wrote: Version: 0.17.9244 (Git)
Re: Inconsistence for FEM constraints
Ohh no there have just been another 11 commits made in the regard of FEM ... 0.17.9783 is uptodate ...bernd wrote:BTW: your FreeCAD is quite outdated in the regard of FEM 0.17.9769 is up to date !Jee-Bee wrote: Version: 0.17.9244 (Git)
Re: Inconsistence for FEM constraints
Yes it works even on the old version
But it is more that this constraint is the only one that doesn't have an delete option.... just for consistence it looks more nice
Ps on my virtual machine i run 0.17.9748 so far more up to date
But it is more that this constraint is the only one that doesn't have an delete option.... just for consistence it looks more nice
Ps on my virtual machine i run 0.17.9748 so far more up to date
Re: Inconsistence for FEM constraints
small question
should it be possible for me as just above programming noob figure out change this behaviour?
should it be possible for me as just above programming noob figure out change this behaviour?
Re: Inconsistence for FEM constraints
It is done in C++ You would need to change the implementation of the constraint force task panel. https://github.com/FreeCAD/FreeCAD/blob ... tForce.cppJee-Bee wrote:small question
should it be possible for me as just above programming noob figure out change this behaviour?
Re: Inconsistence for FEM constraints
I think that it means not just copy paste the remove/delete/... part from https://github.com/FreeCAD/FreeCAD/blob ... essure.cppbernd wrote:It is done in C++ You would need to change the implementation of the constraint force task panel. https://github.com/FreeCAD/FreeCAD/blob ... tForce.cpp
maybe i give it a try, but that should take a while...