FEM video for beginner
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Re: FEM video for beginner
After a number of attempts I finally redid this video
https://youtu.be/UXjsTeMwr0Q
https://youtu.be/UXjsTeMwr0Q
Last edited by makkemal on Tue Feb 28, 2017 5:59 pm, edited 1 time in total.
- kkremitzki
- Veteran
- Posts: 2518
- Joined: Thu Mar 03, 2016 9:52 pm
- Location: Illinois
Re: FEM video for beginner
Excellent video! I might be TAing a Machine Design course in the fall and this video is going in my list of evidence to convince the professor to let me write the course labs for FreeCAD... (with 0.17 hopefully ready by then, hah )makkemal wrote:After a number of attempts I fianlle redid this video
https://youtu.be/UXjsTeMwr0Q
Re: FEM video for beginner
very cool video makkemal !
Found this today, but I do not know who it is?
https://www.youtube.com/watch?v=Qbif13e2iyo
https://www.youtube.com/watch?v=2N-oPw1YuXM
https://www.youtube.com/channel/UCnvFCm ... 3ObfXcxXhw
Found this today, but I do not know who it is?
https://www.youtube.com/watch?v=Qbif13e2iyo
https://www.youtube.com/watch?v=2N-oPw1YuXM
https://www.youtube.com/channel/UCnvFCm ... 3ObfXcxXhw
Re: FEM video for beginner
Hi makkemal,
I'm trying to perform fem analysis by using freecad and calculix on a mac.
I watched your tutorial and it was very useful to me but I would like to ask you some questions.
1) Your fem preference panel is quite different from mine could it be due to the version of freecad running on mac? (The stable version for mac is 0.16).
2) In your fem preference panel there is a z88 sheet, is it possible to run z88 solver using freecad as a pre/post-processor?
3) There is some tutorial about how to perform frame analysis?
P.S. I'm sorry for my broken English... I'm studying it at the same time with freecad!
I'm trying to perform fem analysis by using freecad and calculix on a mac.
I watched your tutorial and it was very useful to me but I would like to ask you some questions.
1) Your fem preference panel is quite different from mine could it be due to the version of freecad running on mac? (The stable version for mac is 0.16).
2) In your fem preference panel there is a z88 sheet, is it possible to run z88 solver using freecad as a pre/post-processor?
3) There is some tutorial about how to perform frame analysis?
P.S. I'm sorry for my broken English... I'm studying it at the same time with freecad!
Re: FEM video for beginner
If you work with FreeCAD FEM it is highly recommended to use latest FreeCAD 0.17.x development version ! There have been tons of fixes and improvements in 0.17 in FEM.]1) Your fem preference panel is quite different from mine could it be due to the version of freecad running on mac? (The stable version for mac is 0.16).
yes, but not all constraints are supported ATM. Just give it a try.2) In your fem preference panel there is a z88 sheet, is it possible to run z88 solver using freecad as a pre/post-processor?
Re: FEM video for beginner
Thanks for the reply bernd,
Video seem to be gaining momentum 557 views in a week
Video seem to be gaining momentum 557 views in a week
Re: FEM video for beginner
1) This means that I have to compile Freecad from source code right?bernd wrote:If you work with FreeCAD FEM it is highly recommended to use latest FreeCAD 0.17.x development version ! There have been tons of fixes and improvements in 0.17 in FEM.]1) Your fem preference panel is quite different from mine could it be due to the version of freecad running on mac? (The stable version for mac is 0.16).
yes, but not all constraints are supported ATM. Just give it a try.2) In your fem preference panel there is a z88 sheet, is it possible to run z88 solver using freecad as a pre/post-processor?
2) I have already installed z88 on my Mac, how can I run it through Freecad?
Edit. I searched freecad website and found a compiled 0.17 version of freecad. Now I'm downloading QT5 version, is it right?
Re: FEM video for beginner
@santacruz
What os are you using ?
What os are you using ?
Re: FEM video for beginner
OSx 10.12. Sierra
Qt4 seems to work better. Using Qt5 I have some mouse issue and the pipeline does not work.
Edit. Seems that gmsh does not work properly. If I try to mesh an object I do not obtain any result although the gmsh say the process is done.
Qt4 seems to work better. Using Qt5 I have some mouse issue and the pipeline does not work.
Edit. Seems that gmsh does not work properly. If I try to mesh an object I do not obtain any result although the gmsh say the process is done.
Re: FEM video for beginner
install latest FreeCAD 0.17. Best is to make sure FreeCAD FEM runs wirh CalculiX. go to preferences FEM Z88 and set the path to the z88r binary. Add an z88 solverobject to the analysis, select this object and run the analysis.santacruz wrote:2) I have already installed z88 on my Mac, how can I run it through Freecad?
ahh, and report back, since you seam to be the first one who uses z88 and FreeCAD on OSX.
bernd