FEM video for beginner

About the development of the FEM module/workbench.
User avatar
bernd
Posts: 3924
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

FEM video for beginner

Postby bernd » Mon Feb 06, 2017 5:41 am

On German part of the forum we had a topic about introduction in FEM. Eventually I ended up making my first screen cast for FreeCAD. It includes simple post processing in VTK too. Sgrogan mentioned it could be useful for others here too. Here we are ..,

the file with the geometry:
klemme-fem.fcstd
(173.62 KiB) Downloaded 22 times


the screen cast:
https://youtu.be/j3UBHW_KVNo

FreeCAD version the video was made with:
0.17.9906

If you are interested in learning German the topic:
viewtopic.php?f=13&t=20361

screen:
screen.jpg
screen.jpg (295.31 KiB) Viewed 732 times
Last edited by bernd on Mon Feb 06, 2017 10:56 am, edited 3 times in total.
User avatar
kkremitzki
Posts: 360
Joined: Thu Mar 03, 2016 9:52 pm
Location: Texas

Re: FEM video for beginner

Postby kkremitzki » Mon Feb 06, 2017 6:31 am

Sehr nett, vielen dank :D
Jee-Bee
Posts: 628
Joined: Tue Jun 16, 2015 10:32 am
Location: Netherlands

Re: FEM video for beginner

Postby Jee-Bee » Mon Feb 06, 2017 10:00 am

kkremitzki wrote:Sehr nett, vielen dank :D

:lol: from what i can remember from school(schule) it is sehr schön. :D
User avatar
PrzemoF
Posts: 1715
Joined: Fri Jul 25, 2014 4:52 pm
Contact:

Re: FEM video for beginner

Postby PrzemoF » Mon Feb 06, 2017 10:46 am

Great video!! Could you add info what version of FreeCAD was used to make it?
User avatar
bernd
Posts: 3924
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: FEM video for beginner

Postby bernd » Mon Feb 06, 2017 10:52 am

PrzemoF wrote:Great video!! Could you add info what version of FreeCAD was used to make it?
done 0.17.9906
makkemal
Posts: 325
Joined: Wed Apr 29, 2015 12:41 pm

Re: FEM video for beginner

Postby makkemal » Tue Feb 14, 2017 5:29 am

@Bernd I tried to follow you example and do a bit of promotion

https://youtu.be/XIaZ__pYqGI
User avatar
bernd
Posts: 3924
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: FEM video for beginner

Postby bernd » Thu Feb 16, 2017 1:06 pm

makkemal wrote:@Bernd I tried to follow you example and do a bit of promotion

https://youtu.be/XIaZ__pYqGI
Hey michael, it's a cool one :D bernd
HoWil
Posts: 445
Joined: Sun Jun 14, 2015 7:31 pm
Location: Austria

Re: FEM video for beginner

Postby HoWil » Fri Feb 17, 2017 9:34 am

makkemal wrote:@Bernd I tried to follow you example and do a bit of promotion
https://youtu.be/XIaZ__pYqGI

Hi Michael,

I like the idea of promoting FEM-wb! Thats why i tried to watch your video and wanted to share it with colleagues.

There is only one problem :o with your video. I think the "visual material" is a little bit faster then the sound or the other way around. When I jumped to the end of your youtube video I still here you speaking while I see you switching off the screencast-tool.
I tested i on firefox and chromium on two comps on ubuntu 16.04 and one mobile device and it is everywhere the same.
Can you please double-check?

Thanks in advance,
HoWil
makkemal
Posts: 325
Joined: Wed Apr 29, 2015 12:41 pm

Re: FEM video for beginner

Postby makkemal » Fri Feb 17, 2017 4:00 pm

Hi Howil I see I wonder how that happened I will try again
User avatar
bernd
Posts: 3924
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: FEM video for beginner

Postby bernd » Fri Feb 17, 2017 4:07 pm

makkemal wrote:Hi Howil I see I wonder how that happened I will try again
You should be able to move the sound to the right position. This does work for sure, I have seen friends doing this, but I do not know how. :oops: