Good evening, wanting to make a "Sweep", in "part design", Freecad crash.
Better than words, a small video:
https://www.youtube.com/watch?v=77zMBzF64lQ
I also tested under linux, freecad crash too.
OS: Mac OS X
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.10085 (Git)
Build type: Release
Branch: (detached from 89925e2)
Hash: 89925e21a3a496fefd20aa47f9a974350330b0c9
Python version: 2.7.13
Qt version: 4.8.7
Coin version: 3.1.3
OCC version: 7.1.0
[Bug] Part Design - Sweep
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
[Bug] Part Design - Sweep
https://github.com/Xav83130/Mini-CNC
Tuto FR-basic -PATH - https://github.com/Xav83130/Mini-CNC/wi ... Basic-Path (plus a jour)
Tuto FR-basic -PATH - https://github.com/Xav83130/Mini-CNC/wi ... Basic-Path (plus a jour)
Re: [Bug] Part Design - Sweep
This has been discussed a few times in the Help forum.
https://forum.freecadweb.org/viewtopic. ... 9&p=156267
https://forum.freecadweb.org/viewtopic.php?f=3&t=20472
https://forum.freecadweb.org/viewtopic.php?f=3&p=136829
And please read Bug submission guidelines
To my knowledge there has been no formal report on the tracker; we may have to wait though, the tracker has just been upgraded and there may be a few problems. https://forum.freecadweb.org/viewtopic.php?f=8&t=20699
https://forum.freecadweb.org/viewtopic. ... 9&p=156267
https://forum.freecadweb.org/viewtopic.php?f=3&t=20472
https://forum.freecadweb.org/viewtopic.php?f=3&p=136829
And please read Bug submission guidelines
(Although you are not the only one posting bugs in the development section and I wonder if the mods care anymore )yorik wrote:2. If you are unsure, discuss the problem on the forum first. Open a new topic here on the forum, in the help section
To my knowledge there has been no formal report on the tracker; we may have to wait though, the tracker has just been upgraded and there may be a few problems. https://forum.freecadweb.org/viewtopic.php?f=8&t=20699
Re: [Bug] Part Design - Sweep
Hello,
Ok NormandC, it is noted.
I searched but not enough.
Sorry for the duplicate.
A moderator can delete the post.
Ok NormandC, it is noted.
I searched but not enough.
Sorry for the duplicate.
A moderator can delete the post.
https://github.com/Xav83130/Mini-CNC
Tuto FR-basic -PATH - https://github.com/Xav83130/Mini-CNC/wi ... Basic-Path (plus a jour)
Tuto FR-basic -PATH - https://github.com/Xav83130/Mini-CNC/wi ... Basic-Path (plus a jour)