Starting parts

About the development of the Part Design module/workbench. PLEASE DO NOT POST HELP REQUESTS HERE!
jmaustpc
Posts: 8101
Joined: Tue Jul 26, 2011 6:28 am
Location: Australia

Re: Starting parts

Postby jmaustpc » Wed Oct 14, 2015 9:44 am

pinguindark wrote: I'm working in other version of GT2


your first post, welcome to FreeCAD.
pinguindark
Posts: 2
Joined: Wed Oct 14, 2015 12:20 am

Re: Starting parts

Postby pinguindark » Thu Oct 15, 2015 4:16 am

Thank you jmaustpc
Tarzanete
Posts: 4
Joined: Fri Nov 13, 2015 6:27 pm

Re: Starting parts

Postby Tarzanete » Sat Nov 14, 2015 2:51 pm

Hello everybody,

I'm totally new with github and freecad but I am creating a piping library. I have started drawing DN15 pieces (1/2") in order to get used with Freecad. My idea is completing a standard library of all the parts that are common in piping, including ISO figures as tees etc.
Please could you guide me in which directory should I include these kids do of objects. I've started by including them in one of my repositories (the only one right now). Please feel free to visit it in Tarzanete/Piping.
I need you help please because as I said I 'm totally new using github.

Thank you a lot.
Tremendous work what you have done!
User avatar
sgrogan
Posts: 3059
Joined: Wed Oct 22, 2014 5:02 pm

Re: Starting parts

Postby sgrogan » Sun Nov 15, 2015 4:07 pm

Tarzanete wrote:Please could you guide me in which directory should I include these kids do of objects.

see here:https://github.com/FreeCAD/FreeCAD-library
petat
Posts: 14
Joined: Tue Mar 18, 2014 5:21 pm

Re: Starting parts

Postby petat » Wed Dec 02, 2015 7:49 pm

Hello
I would like to publish some parts to FreeCAD-library
could somebody send me acces?
Thanks
Renato Rebelo
Posts: 183
Joined: Mon May 19, 2014 1:14 pm
Location: Vouzela - Portugal

Re: Starting parts

Postby Renato Rebelo » Tue Feb 23, 2016 10:55 pm

Hello,
I would like to contribute with some parts, can I have access to git.
thank you,
Renato
my native language is not English, please excuse me any incorrectness, I apologize for any inconvenience caused, thank you
JV_3D
Posts: 4
Joined: Fri Dec 23, 2016 4:45 am

Re: Starting parts

Postby JV_3D » Fri Dec 23, 2016 4:57 am

Hello,

I am trying to install the library via the FreeCAD addons (github: https://github.com/FreeCAD/FreeCAD-addons) since it state is the recommended tool, but it is not currently working.

I upload a screenshot:

Macro-error.jpg
Macro-error.jpg (77.02 KiB) Viewed 417 times


I think the solution is to use the manual installation, right? Nevertheless, I wanted to let you guys know the issue.
User avatar
yorik
Site Admin
Posts: 8677
Joined: Tue Feb 17, 2009 9:16 pm
Location: São Paulo, Brazil
Contact:

Re: Starting parts

Postby yorik » Fri Dec 23, 2016 9:09 pm

You need to install it via the Workbenches section. I must remove it from the MAcros list...
User avatar
hedgehog
Posts: 15
Joined: Sun Apr 09, 2017 5:39 am

Re: Starting parts

Postby hedgehog » Wed Apr 26, 2017 6:13 am

I am currently using some parts that are available under the license:
Creative Commons Attribution - Non Commercial - Share Alike 3.0 Unsupported Licence

Does the FreeCAD library license allow these models/files to be contributed. Obviously the original author would be acknowledged in the commit and the freeCAD files.

Appreciate any feed back.
User avatar
yorik
Site Admin
Posts: 8677
Joined: Tue Feb 17, 2009 9:16 pm
Location: São Paulo, Brazil
Contact:

Re: Starting parts

Postby yorik » Wed Apr 26, 2017 5:50 pm

hedgehog wrote:Does the FreeCAD library license allow these models/files to be contributed


Yes! The only thing we want is to make sure that either the parts uploaded on the library were modelled by the author himself (not taken or converted from another model), or that the author explicitely agrees. Mostly to avoid that someone will come complaining that some model was "stolen"...

Best thing would be the author to make a pull request him/herself, so the merge got registered under his/her name...