Top Sub

Show off your FreeCAD projects here!
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
oldgeek
Posts: 8
Joined: Thu Dec 01, 2016 4:18 pm

Top Sub

Post by oldgeek »

Hi. This was my first go at doing my own project in Freecad. I have been watching some tutorials on Youtube and decided to take a plunge. This is part of a drill that breaks out plugs in oilwell holes. I had some help here on the forums with cutting the stub acme thread profile. viewtopic.php?f=3&t=18854

I sure do appreciate this forum and the help I got here.
Attachments
top sub pic2.jpg
top sub pic2.jpg (164.63 KiB) Viewed 1883 times
top sub pic.jpg
top sub pic.jpg (96.02 KiB) Viewed 1883 times
oldgeek
Posts: 8
Joined: Thu Dec 01, 2016 4:18 pm

Re: Top Sub

Post by oldgeek »

I forgot to include the Freecad Information

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6706 (Git)
Build type: Release
Branch: releases/FreeCAD-0-16
Hash: f86a4e411ff7848dea98d7242f43b7774bee8fa0
Python version: 2.7.8
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
triplus
Veteran
Posts: 9471
Joined: Mon Dec 12, 2011 4:45 pm

Re: Top Sub

Post by triplus »

Looking good.
Post Reply