Madeleine de Course Stellaire No16

Show off your FreeCAD projects here!
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
emills2
Posts: 875
Joined: Tue Apr 28, 2015 11:23 pm

Re: Madeleine de Course Stellaire No16

Post by emills2 »

ok...i will do what i can to update icons and filenames to match the currently functioning macros by Friday.

I just had a quick look around and realized that i let the repo organization drift to the point where i even i have a hard time finding thing :?

It's definitely more fun to write new stuff than to maintain existing stuff :D
triplus
Veteran
Posts: 9471
Joined: Mon Dec 12, 2011 4:45 pm

Re: Madeleine de Course Stellaire No16

Post by triplus »

Yes having proper icons would be cool. ;)

If you will provide that first thing i will do is create a set of macro commands on the toolbar. And after test them.
emills2
Posts: 875
Joined: Tue Apr 28, 2015 11:23 pm

Re: Madeleine de Course Stellaire No16

Post by emills2 »

i started a tutorial. It is useful to get through setup at least. This is only for 2 of the macros, so you can get a feel for the tools without spending an hour making toolbars.

edit:fixed url
https://github.com/edwardvmills/NURBSli ... cCurve4.md

i only need an hour or two more of work on it, so it should be done this friday.

if you want to get ahead of that...i did make a few new icons, so here is the recommended setup. Highlighted are the 2 macros used in the tutorial above:
Tutorial 0.01 setup - ControlPoly4 and CubicCurve4.PNG
Tutorial 0.01 setup - ControlPoly4 and CubicCurve4.PNG (84.95 KiB) Viewed 1953 times
still missing 4 icons, but i think it should be bearable.

If you want to look at existing models, look in https://github.com/edwardvmills/NURBSli ... 0to%200.17

Since i had to make some drastic changes going from 0.16 to 0.17, i have no idea which ones of the older models still work.
Last edited by emills2 on Sun Feb 12, 2017 3:08 am, edited 1 time in total.
emills2
Posts: 875
Joined: Tue Apr 28, 2015 11:23 pm

Re: Madeleine de Course Stellaire No16

Post by emills2 »

tutorial more or less complete.

edit:fixed url
https://github.com/edwardvmills/NURBSli ... cCurve4.md

I think it is ready aside from typos. It gives good coverage of just two macros, so you get a lot of mileage for very little setup time.

I hope you like it. If Someone posts screenshots of actual curve models made with it, i'll write the next tutorial: ControlGrid44 and CubicSurface44!
Last edited by emills2 on Sun Feb 12, 2017 3:07 am, edited 1 time in total.
triplus
Veteran
Posts: 9471
Joined: Mon Dec 12, 2011 4:45 pm

Re: Madeleine de Course Stellaire No16

Post by triplus »

Thanks will go over everything at weekend.

P.S. Likely we should open new thread to discuss this further.
triplus
Veteran
Posts: 9471
Joined: Mon Dec 12, 2011 4:45 pm

Re: Madeleine de Course Stellaire No16

Post by triplus »

Tutorial_0.01.png
Tutorial_0.01.png (23.65 KiB) Viewed 1864 times
P.S. Waiting for the Tutorial_0.02.
emills2
Posts: 875
Joined: Tue Apr 28, 2015 11:23 pm

Re: Madeleine de Course Stellaire No16

Post by emills2 »

:D

A user! Most excellent.
Tutorial 0.02 on the way.

I will post the link in the macro forum tho, this conversation doesn't belong here.
emills2
Posts: 875
Joined: Tue Apr 28, 2015 11:23 pm

Re: Madeleine de Course Stellaire No16

Post by emills2 »

edited tutorial file name, here's a new link

https://github.com/edwardvmills/NURBSli ... cCurve4.md

working on 0.02

posted notice here so the link doesn't die without an explanation
edit: fixed urls in previous links....since 9 persons tried to go the old link after i posted the new ones
triplus
Veteran
Posts: 9471
Joined: Mon Dec 12, 2011 4:45 pm

Re: Madeleine de Course Stellaire No16

Post by triplus »

Post Reply