[bug#2682] -constraints with external geometry disapear after closing/opening the sketch
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
[bug#2682] -constraints with external geometry disapear after closing/opening the sketch
Hi,
I don't know if it's a bug or a non yet implemented feature, so just in case as I found nothing about this in the forum.
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.8291 (Git)
Build type: Release
Branch: master
Hash: 94f07c85ee99c9cc94e144245fb97bedd0a38771
Python version: 2.7.8
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.0.0
1st step : use external datum plane in sketch constraints 2nd step make a pad : 3rd step change datum plane orientation to check the link with the sketch (70 to 75°) it works like a charm: Back in the sketch, all external reference have disapear :
link is lost with the datum plane (back to 70°):
I don't know if it's a bug or a non yet implemented feature, so just in case as I found nothing about this in the forum.
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.8291 (Git)
Build type: Release
Branch: master
Hash: 94f07c85ee99c9cc94e144245fb97bedd0a38771
Python version: 2.7.8
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.0.0
1st step : use external datum plane in sketch constraints 2nd step make a pad : 3rd step change datum plane orientation to check the link with the sketch (70 to 75°) it works like a charm: Back in the sketch, all external reference have disapear :
link is lost with the datum plane (back to 70°):
Last edited by nemesis on Tue Mar 07, 2017 12:24 pm, edited 2 times in total.
Re: [bug?] -constraints with external geometry disapear after closing/opening the sketch
and the test file
- Attachments
-
- test (2).FCStd
- (14.77 KiB) Downloaded 69 times
Re: [bug?] -constraints with external geometry disapear after closing/opening the sketch
nemesis, the "Part Design module development" forum specifically dictates:
Please have a look at the "Bug submission guidelines" pinned at the top of the "Help on using FreeCAD" forum.
[quote="The "Bug submission guidelines" forum"]If you are unsure, discuss the problem on the forum first. Open a new topic here on the forum, in the help section, and ask if what you found is a bug. Other users will surely be able to help you determining what you should do.[/quote]
Your topic is not about development, it's about bug reporting, this should have been posted in the "Help on using FreeCAD" forum.About the development of the Part Design module/workbench. PLEASE DO NOT POST HELP REQUESTS HERE!
Please have a look at the "Bug submission guidelines" pinned at the top of the "Help on using FreeCAD" forum.
[quote="The "Bug submission guidelines" forum"]If you are unsure, discuss the problem on the forum first. Open a new topic here on the forum, in the help section, and ask if what you found is a bug. Other users will surely be able to help you determining what you should do.[/quote]
Re: [bug?] -constraints with external geometry disapear after closing/opening the sketch
Moved topic to "Help on using FreeCAD"-forum ...
Deutsche FreeCAD Tutorials auf Youtube
My GrabCAD FreeCAD-Projects
FreeCAD lessons for beginners in english
Native german speaker - so apologies for my english, no offense intended
My GrabCAD FreeCAD-Projects
FreeCAD lessons for beginners in english
Native german speaker - so apologies for my english, no offense intended
Re: [bug?] -constraints with external geometry disapear after closing/opening the sketch
ok,
I thought that debugging a software was part of the devloppment... as I didn't ask for help
I thought that debugging a software was part of the devloppment... as I didn't ask for help
- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: [bug?] -constraints with external geometry disapear after closing/opening the sketch
I have opened your file, edited sketch -> there are no constraints. None. Zip. Just lines, nothing else.nemesis wrote:and the test file
But I seem to be able to confirm your bug - the links to datum planes seem to go away after closing->reopening a sketch.
- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: [bug?] -constraints with external geometry disapear after closing/opening the sketch
Trying to debug. External geometry links are lost right while opening the sketch. And it is special to datum planes - links to another sketch survive just fine...
Re: [bug?] -constraints with external geometry disapear after closing/opening the sketch
Yep it looks like they disappear when saving the file.DeepSOIC wrote:I have opened your file, edited sketch -> there are no constraints. None. Zip. Just lines, nothing else.
while opening the file on OS X I also loose all the constraint. only the ones with external geometry where loosed on windows, without closing the file, so I have to check tomorrow on windows.
good to know, I guess that's easier to find the bug then.... or maybe not.Deepsoic wrote:it is special to datum planes - links to another sketch survive just fine...
Bug report here
Re: [bug] -constraints with external geometry disapear after closing/opening the sketch
Also confirmed on OS X version:
OS: Mac OS X
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.8293 (Git)
Build type: Release
Branch: (detached from 51e23d8)
Hash: 51e23d854e59ab0a23a9ea9b19e74e5f02753d82
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 3.1.3
OCC version: 7.0.0
OS: Mac OS X
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.8293 (Git)
Build type: Release
Branch: (detached from 51e23d8)
Hash: 51e23d854e59ab0a23a9ea9b19e74e5f02753d82
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 3.1.3
OCC version: 7.0.0
Re: [bug] -constraints with external geometry disapear after closing/opening the sketch
@nemesis does this bug still exist ?
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs