Hello,
Just started using FreeCAd yesterday. I'm unable to see an answer on the web for forum yet.
In your placement of object you can enter in x,y or z. You can also click the up and down arrows right next to where you enter in your x, y or z data. It will move the part in 1" increments. It's called a step up or step down. Anyway to change the increments to customer say .125inch or 2mm, or anything you want?
Change step up step down.
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 3
- Joined: Thu Mar 16, 2017 2:13 pm
Re: Change step up step down.
Hi hobbyhands,
Welcome to the forum.
Without screenshots or a file this is really hard to answer.
And.... Before some of the heavyweights on here (Who i'm certain will know instantly) even look to give you and answer
they will want to know. Version number, operating system, libaries etc etc.
See the 'IMPORTANT: Please click here and read this first, before asking for help"
at the top of this very page. It'll show you how to get everything thats needed.
Paul.
Welcome to the forum.
Without screenshots or a file this is really hard to answer.
And.... Before some of the heavyweights on here (Who i'm certain will know instantly) even look to give you and answer
they will want to know. Version number, operating system, libaries etc etc.
See the 'IMPORTANT: Please click here and read this first, before asking for help"
at the top of this very page. It'll show you how to get everything thats needed.
Paul.
-
- Posts: 3
- Joined: Thu Mar 16, 2017 2:13 pm
Re: Change step up step down.
So see the arrows. If I click up or won it moves the object in increments of 1inch(25.4mm). I want to be able to adjust how much the object will move per click. I hope you can see the image in the link?
-
- Posts: 3
- Joined: Thu Mar 16, 2017 2:13 pm
Re: Change step up step down.
Here is the direct link. For some reason the image won't show.
http://www.use.com/supersize.pl?set=808 ... d5b54e&p=1
http://www.use.com/supersize.pl?set=808 ... d5b54e&p=1