File saving error

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
Post Reply
STLIM
Posts: 1
Joined: Sat Mar 25, 2017 11:18 am

File saving error

Post by STLIM »

I am facing file saving error on my new ASUS Eeebook E402NA. It is an low end notebook. Can anyone could advise how to resolve this issue ?
User avatar
DeepSOIC
Veteran
Posts: 7896
Joined: Fri Aug 29, 2014 12:45 am
Location: used to be Saint-Petersburg, Russia

Re: File saving error

Post by DeepSOIC »

issue #2245? If yes:
In the attached changeset there is now a way implemented to directly write to/read from the zip stream. In order to activate this go to the parameter editor and create under "BaseApp/Preferences/Mod/Part/General" the boolean key "DirectAccess" and set it to true.
User avatar
NormandC
Veteran
Posts: 18589
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: File saving error

Post by NormandC »

There's a link at the top of this forum titled IMPORTANT: Please click here and read this first, before asking for help. It's framed with a reddish/pinkish background. This color was purposely chosen to clash with the overall appearance of the forum so it would be hard not to notice it.

Frankly, it's annoying to see that some newcomers are still blind to it.
User avatar
DeepSOIC
Veteran
Posts: 7896
Joined: Fri Aug 29, 2014 12:45 am
Location: used to be Saint-Petersburg, Russia

Re: File saving error

Post by DeepSOIC »

NormandC wrote:Frankly, it's annoying to see that some newcomers are still blind to it.
It was posted in Open Discussion originally, which doesn't have that pinkish frame.
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: File saving error

Post by chrisb »

DeepSOIC wrote:It was posted in Open Discussion originally, which doesn't have that pinkish frame.
That's not really much better. BTW: how is the redesign of the IMPORTANT page going on?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
NormandC
Veteran
Posts: 18589
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: File saving error

Post by NormandC »

chrisb wrote:BTW: how is the redesign of the IMPORTANT page going on?
https://forum.freecadweb.org/viewtopic. ... 20#p161972
NormandC wrote:But one thing we need to do before implementing these changes is to write up a common questions topic.
To which nobody replied.
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: File saving error

Post by chrisb »

NormandC wrote:To which nobody replied.
Give me time until the end of the week.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply