dear sir
Once again something went wrong
Where can i ask support foor the assembly_2 workbench.
I found 2 installation procedures. One in the macro directory, but assembly does not appear in the workbenches.
One in the mod directory assembly appears but i can not move added parts
please advice
thanks
Ing E.Blok
problem with assembly_2
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
problem with assembly_2
- Attachments
-
- picture.jpg (175.62 KiB) Viewed 769 times
Re: problem with assembly_2
Hello.
It does seem to me that Installation went well ?
In C:\Windows_User_Name\Appdata\Roaming\FreeCAD\Mod\assembly2 there should be all data from github-project.
I made a tutorial for using assembly 2 with german audio.
Hopefully it will give you enough information for intended workflow.
Roland
It does seem to me that Installation went well ?
In C:\Windows_User_Name\Appdata\Roaming\FreeCAD\Mod\assembly2 there should be all data from github-project.
I made a tutorial for using assembly 2 with german audio.
Hopefully it will give you enough information for intended workflow.
Roland
Deutsche FreeCAD Tutorials auf Youtube
My GrabCAD FreeCAD-Projects
FreeCAD lessons for beginners in english
Native german speaker - so apologies for my english, no offense intended
My GrabCAD FreeCAD-Projects
FreeCAD lessons for beginners in english
Native german speaker - so apologies for my english, no offense intended
Re: problem with assembly_2
dear sir
Many thanks for the information.
The installation was correct.
What i learned from the video is that you have to start with a new file in assembly2 and than add the parts
I started with the file made in part design and then added parts > does not work.
many thanks it works now.
Ing E.Blok
Many thanks for the information.
The installation was correct.
What i learned from the video is that you have to start with a new file in assembly2 and than add the parts
I started with the file made in part design and then added parts > does not work.
many thanks it works now.
Ing E.Blok