Hi NormanC, Thanks for looking at this.
NormandC wrote:It would help if you described here the issue so viewing the screencast wasn't necessary.
In my experience a creencast is far more efficient and most importantly definitive. That is, it answers the question: What "exactly" did you do before the crash, e.g. moving the toolbars etc. Hopefully someone can reproduce the crash just with the Draft edit tool? But if not, they can see "everything" that was done.
NormandC wrote:Granted it shouldn't crash, but how did you even think of trying to use Draft Edit on a Sketch?
By two errors of mine it seems:
The first error is misunderstanding you here: https://forum.freecadweb.org/viewtopic. ... 86#p145672
NormandC wrote:Draft and Sketcher are two completely different workbenches, you cannot simply use one's tool in the other workbench.
My understanding is that I regularly apply another workbench tool to a sketch. For example, padding the sketch. I it seemed to me that I was doing to the sketch what I regularly do, apply another workbench tool. Just this time it was not a part/part design tool.
So the second error is, misunderstanding the FreeCAD UI principles. Generally it seems that when a tool cannot be used it is disabled/inactive.
If nothing else I was able to learn that today.
But you are correct. It should not crash.