Hello,
I have created a simple sketch with some constraints on the X-Y pane and then pad it.
Now that I have a 3D model out of my sketch, I would like to put some more constraints so that the rear and front heights of the model will not be the same size (see attachment)
And, here is the sketch that was padded:
It's a beginner question but I spent a lot of hours before submitting that question
Thanks you,
Adi Barda
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6706 (Git)
Build type: Release
Branch: releases/FreeCAD-0-16
Hash: f86a4e411ff7848dea98d7242f43b7774bee8fa0
Python version: 2.7.8
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
How to modify heights of model created by a sketch in the X-Y pane?
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: How to modify heights of model created by a sketch in the X-Y pane?
Hi Adi and welcome! Select one of the 20 mm faces, click the Create Sketch tool, and Sketcher a triangle. Use the Link To External Geometry tool to create edges from Pad so you can constrain vertices of the triangle onto them:
OS: Ubuntu 16.04.2 LTS
Word size of OS: 32-bit
Word size of FreeCAD: 32-bit
Version: 0.16.6707 (Git)
Build type: None
Branch: releases/FreeCAD-0-16
Hash: 5465bc47c95db45e0be85dc0e2872419efadce0f
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
Then Pocket "Through All"OS: Ubuntu 16.04.2 LTS
Word size of OS: 32-bit
Word size of FreeCAD: 32-bit
Version: 0.16.6707 (Git)
Build type: None
Branch: releases/FreeCAD-0-16
Hash: 5465bc47c95db45e0be85dc0e2872419efadce0f
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17