Hi. I need drill for hole. But i cant drill config.. Help me please
I can try 0.16 and 0.17 ver.
Drilling problem
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 7
- Joined: Thu Mar 30, 2017 11:09 am
Re: Drilling problem
Did you try the Path Workbench in 0.17? If so, where did you face problems? I understand the first of your pictures, but the second doesn't tell me anything. If it is important please explain it a bit further.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 7
- Joined: Thu Mar 30, 2017 11:09 am
Re: Drilling problem
Hi. I have not complex english language, sorry. Do you step by step how to drilling process tell me?
Re: Drilling problem
There is not much documentation yet. I hope to find the time to start the wiki docs soon. In the meantime you may look at
- sliptonics videos: https://forum.freecadweb.org/viewtopic.php?f=15&t=19642.
- If you prefer written docs you may look at this post, but be aware that it is outdated, some things have changed: https://forum.freecadweb.org/viewtopic.php?f=15&t=19642.
When you have set up a job and a tooltable you click on the "Create a path drilling object" icon and get a list of holes which can be drilled with the selected drill. The wholes are identified by their faces, not by their edge, so you have to tilt the view to see which hole belongs to which face.
- sliptonics videos: https://forum.freecadweb.org/viewtopic.php?f=15&t=19642.
- If you prefer written docs you may look at this post, but be aware that it is outdated, some things have changed: https://forum.freecadweb.org/viewtopic.php?f=15&t=19642.
When you have set up a job and a tooltable you click on the "Create a path drilling object" icon and get a list of holes which can be drilled with the selected drill. The wholes are identified by their faces, not by their edge, so you have to tilt the view to see which hole belongs to which face.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.