coversion of .obj to .step file

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
00bluebeast
Posts: 2
Joined: Thu Aug 20, 2015 9:46 pm

coversion of .obj to .step file

Post by 00bluebeast »

Hello, I have an .obj file I need converted to .step and repair any information that didnt transfer, please message me if interested.
alex mak
Posts: 1
Joined: Tue Sep 08, 2015 3:28 am

Re: coversion of .obj to .step file

Post by alex mak »

Hi,

I can convert It,

Send over the .obj and will see.
Thanks
jmaustpc
Veteran
Posts: 11207
Joined: Tue Jul 26, 2011 6:28 am
Location: Australia

Re: coversion of .obj to .step file

Post by jmaustpc »

alex mak wrote:Hi,

I can convert It,

Send over the .obj and will see.
Thanks
Your first post, welcome to FreeCAD.

You should find that you can send private messages now if you need/want to.

You may know this already, but converting an obj file to step is not usually straight forward as obj will not contain much of the data required. Hence for some data you will need further information, although in some cases an approximation or guess may suffice.

Jim
Post Reply