coversion of .obj to .step file

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Posts: 2
Joined: Thu Aug 20, 2015 9:46 pm

coversion of .obj to .step file

Postby 00bluebeast » Thu Aug 20, 2015 9:48 pm

Hello, I have an .obj file I need converted to .step and repair any information that didnt transfer, please message me if interested.
alex mak
Posts: 1
Joined: Tue Sep 08, 2015 3:28 am

Re: coversion of .obj to .step file

Postby alex mak » Tue Sep 08, 2015 3:32 am


I can convert It,

Send over the .obj and will see.
Posts: 8094
Joined: Tue Jul 26, 2011 6:28 am
Location: Australia

Re: coversion of .obj to .step file

Postby jmaustpc » Tue Sep 08, 2015 7:15 am

alex mak wrote:Hi,

I can convert It,

Send over the .obj and will see.

Your first post, welcome to FreeCAD.

You should find that you can send private messages now if you need/want to.

You may know this already, but converting an obj file to step is not usually straight forward as obj will not contain much of the data required. Hence for some data you will need further information, although in some cases an approximation or guess may suffice.

Posts: 1
Joined: Thu Nov 03, 2016 7:01 am
Location: Spain

coversion of obj to step file

Postby Williamgrish » Mon Nov 07, 2016 4:50 pm

can anyone convert a multiplayer building from w3d to OBJ file format so i can use it for scale in a map I want to make?