Sketcher icons (finally) aligned

A subforum for research and development of the user interface of FreeCAD

Moderator: agryson

chrisb
Posts: 1635
Joined: Tue Mar 17, 2015 9:14 am

Re: Sketcher icons (finally) aligned

Postby chrisb » Mon Mar 06, 2017 11:39 pm

I would prefer the first proposal with the knots. Increasing something on a knot makes it somewhat stronger and I would associate that rather with a sharp bend than with continuity. Besides there might be programmers who understand something completely different when seeing C++ :?
DeepSOIC
Posts: 4443
Joined: Fri Aug 29, 2014 12:45 am
Location: Saint-Petersburg, Russia

Re: Sketcher icons (finally) aligned

Postby DeepSOIC » Mon Mar 06, 2017 11:54 pm

chrisb wrote:Besides there might be programmers who understand something completely different when seeing C++
That is a part of the idea, to make a pun :lol:
chrisb
Posts: 1635
Joined: Tue Mar 17, 2015 9:14 am

Re: Sketcher icons (finally) aligned

Postby chrisb » Tue Mar 07, 2017 12:07 am

Well tonight I'm a slow thinker. But how about C++ to increase continuity and C# to make corners sharp :lol:
DeepSOIC
Posts: 4443
Joined: Fri Aug 29, 2014 12:45 am
Location: Saint-Petersburg, Russia

Re: Sketcher icons (finally) aligned

Postby DeepSOIC » Tue Mar 07, 2017 12:39 am

chrisb wrote:Well tonight I'm a slow thinker. But how about C++ to increase continuity and C# to make corners sharp :lol:
LOL!
User avatar
agryson
Posts: 438
Joined: Wed Nov 23, 2016 8:30 am
Location: Paris, France
Contact:

Re: Sketcher icons (finally) aligned

Postby agryson » Sat Mar 11, 2017 10:22 pm

Sorry for the super late reply, just back from vacation. Sure, I'll have a look at creating some based on those sketches. Might take me a little while though, I'd like to finish FEM first, so if anyone else wants to have a crack at it using the guidelines, don't hesitate.
abdullah
Posts: 1497
Joined: Sun May 04, 2014 3:16 pm

Re: Sketcher icons (finally) aligned

Postby abdullah » Sun Mar 12, 2017 8:07 am

agryson wrote:Sorry for the super late reply, just back from vacation. Sure, I'll have a look at creating some based on those sketches. Might take me a little while though, I'd like to finish FEM first, so if anyone else wants to have a crack at it using the guidelines, don't hesitate.


Hey! No problem at all. I am taking some days to actually use FreeCAD. My development is currently stopped. There is no hurry at all :)
abdullah
Posts: 1497
Joined: Sun May 04, 2014 3:16 pm

Re: Sketcher icons (finally) aligned

Postby abdullah » Mon Mar 13, 2017 9:40 pm

agryson wrote:Sorry for the super late reply, just back from vacation. Sure, I'll have a look at creating some based on those sketches. Might take me a little while though, I'd like to finish FEM first, so if anyone else wants to have a crack at it using the guidelines, don't hesitate.


And I just realised I would need a third icon :oops: . It is for the showing multiplicity of knots (showing/hiding the numbers in parenthesis on the screenshot above). It works exactly the same as the control polygon or the curvature comb. Just this time what is shown/hidden is the multiplicity.
User avatar
agryson
Posts: 438
Joined: Wed Nov 23, 2016 8:30 am
Location: Paris, France
Contact:

Re: Sketcher icons (finally) aligned

Postby agryson » Tue Mar 14, 2017 6:06 am

abdullah wrote:And I just realised I would need a third icon
No problem, I've created a personal ticket so i don't forget, feel free to comment on that if you're need to. I'll PR to your branch again so you can confirm it works for you.
abdullah
Posts: 1497
Joined: Sun May 04, 2014 3:16 pm

Re: Sketcher icons (finally) aligned

Postby abdullah » Wed Mar 15, 2017 12:45 pm

Thanks!! :)