Part Design Workbench icons aligned to guidelines

A subforum for research and development of the user interface of FreeCAD

Moderator: agryson

wojtekm
Posts: 3
Joined: Fri Feb 24, 2017 3:17 am

Re: Part Design Workbench icons aligned to guidelines

Postby wojtekm » Fri Feb 24, 2017 3:25 am

Great work!

May I ask you to do something similar also with this...? :roll:
Attachments
FreeCAD_icons.png
FreeCAD_icons.png (10.62 KiB) Viewed 168 times
User avatar
agryson
Posts: 438
Joined: Wed Nov 23, 2016 8:30 am
Location: Paris, France
Contact:

Re: Part Design Workbench icons aligned to guidelines

Postby agryson » Fri Feb 24, 2017 7:19 am

wojtekm wrote:May I ask you to do something similar also with this...?
Of course, I'm working through all the workbenches before getting to the core icons. You can track my progress on my fork.
I'm currently about 25% done with FEM, then will tackle assembly. Once that's done I can move on to the core icons. If you need a timeline, I expect about 4 to 6 weeks before I'm done.
wojtekm
Posts: 3
Joined: Fri Feb 24, 2017 3:17 am

Re: Part Design Workbench icons aligned to guidelines

Postby wojtekm » Sat Feb 25, 2017 6:18 pm

Great! I'm very excited about your work, and FreeCAD progress in general. :D
User avatar
bill
Posts: 155
Joined: Fri Jan 09, 2015 9:25 pm

Re: Part Design Workbench icons aligned to guidelines

Postby bill » Mon Mar 13, 2017 4:26 pm

In that discussion of changing/renaming "THICKNESS" in another thread , maybe the word your searching for is "WALL (dim./thickness)". Just a suggestion!