[Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
4. is done
Let me know if you have problems!
Let me know if you have problems!
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
Hell yeh!!!!!!!!!!NormandC wrote:I would be glad if you joined the team, and I'm sure sgrogan would be too
I'm only "Approved" so i can't handle 4
NormandC beat me but I post anyway.
"fight the good fight"
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
Say that again?sgrogan wrote:I'm only "Approved" so i can't handle 4
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
Hello,
But as I already wrote here, my debian/control file replicates the exact order in which the packages are listed for the netgen-4.9.13 package.
Also, in all the debian folders for a variety of packages from the debian/ubuntu repos I've studied over the years, I've always seen the packages listed in the same order:
Thanks for your continued help in this packaging project!
I just had a (albeit quick) look at the Debian Policy manual. Apart from that single unhelpful statement, this matter doesn't seem to be discussed nor explained anywhere else.gdo35 wrote:Regarding to the debian policy manual :NormandC wrote:But I still don't understand why you reordered the listed packages in the debian/control file.Debian Policy Manual wrote:The ordering of the paragraphs in control files is significant.
But as I already wrote here, my debian/control file replicates the exact order in which the packages are listed for the netgen-4.9.13 package.
Also, in all the debian folders for a variety of packages from the debian/ubuntu repos I've studied over the years, I've always seen the packages listed in the same order:
- binary/runtime packages
- developement (*-dev) packages
- documentation (*-doc) packages
That would be helpful.gdo35 wrote:I got an unsatisfied dependency (Sorry, I did not write which one). I could check if really needed.
I'll try to make time once you provide your branch.gdo35 wrote:I turned off warnings about symbols as I cannot solve it for now. Maybe all is ok and you can give it a try with FreeCAD.
Thanks for your continued help in this packaging project!
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
Hello,
Sorry I was away all the week end, just following forum from smartphone.
Thank you very much for adding me to the team on Launchpad. It is a real pleasure to help, even if I am pretty sure that I will never be able to help you as much as you did since so many years.
I was unable to reproduce the problem I met with debian/control ordering.
Maybe I did something more while debugging I do not really remember...
So I think the real problem was between my chair and my keyboard...
I created a gdo branch on the repository, I just let you test. I build the package with this command :
You will see all the warnings like this one (sorry it is in french) :
++
gdo
Sorry I was away all the week end, just following forum from smartphone.
Thank you very much for adding me to the team on Launchpad. It is a real pleasure to help, even if I am pretty sure that I will never be able to help you as much as you did since so many years.
I was unable to reproduce the problem I met with debian/control ordering.
Maybe I did something more while debugging I do not really remember...
So I think the real problem was between my chair and my keyboard...
I created a gdo branch on the repository, I just let you test. I build the package with this command :
Code: Select all
$ debuild -uc -us -j$(nproc) --lintian-opts --profile debian
Code: Select all
dpkg-shlibdeps: avertissement: symbole _ZN6netgen11VisualScene17transformationmatE utilisé par debian/libnglib-5.3.1/usr/lib/x86_64-linux-gnu/libcsgvis.so.0.0.0 non trouvé dans les bibliothèques
gdo
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
Hi all,
I can build FreeCAD with my generated Netgen packages but I have no idea of the tests I could perform...
Could you give me some clues ?
++
gdo
I can build FreeCAD with my generated Netgen packages but I have no idea of the tests I could perform...
Could you give me some clues ?
++
gdo
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
This is good newsgdo35 wrote:I can build FreeCAD with my generated Netgen packages but I have no idea of the tests I could perform...
Create a Part Cube
Switch to Mesh Design WB
From the menu "Create mesh from shape" ,choose the Netgen mesher then OK
Repeat the above clicking first clicking "Second order elements" then again clicking "Quad dominated"
Switch to the FEM WB
select the cube in the Combo view then the NG mesh icon from the toolbar. Then OK
select the cube then NG mesh icon from the toolbar, uncheck Second order and OK
Save the .fcstd file and post here.
If you get this far we are dancing in the street.
"fight the good fight"
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
No error. I have no idea of what I have done.
The .fcstd file is in attachment.
The .fcstd file is in attachment.
- Attachments
-
- test_ng.fcstd
- (6.71 KiB) Downloaded 62 times
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
You have created a series of different meshes that test most, if not all of FreeCAD's netgen support.gdo35 wrote:No error. I have no idea of what I have done.
And they all work!
We now need to see if they build with git-build. Ideally locally as NormandC pointed out earlier in this thread, or on Launchpad on one of our personal PPA's. If this works we are psyched.
"fight the good fight"
Re: [Ubuntu Daily PPA] Transitioning to OCCT7, VTK7...
Great !!!
I'll try to test with git-builder this week
I'll try to test with git-builder this week