Tutorial on FEM/Civil/Structural/Arch Modeling & Analysis

[cnirbhay]

(https://www.youtube.com/watch?v=wAJe1R5NDGw)

--
Nirbhay Chauhan
https://cnirbhay.wordpress.com/

[Linden]

I cant believe no one posted here yet. Thank you for the tutorial I haven't had a chance to watch it yet. I have also bookmarked you word press sight for further reading.

[cnirbhay]

I cant believe no one posted here yet. Thank you for the tutorial I haven't had a chance to watch it yet. I have also bookmarked you word press sight for further reading.

Thank you so much Linden and you're welcome.

--
Nirbhay Chauhan
https://cnirbhay.wordpress.com
https://www.facebook.com/eklavyaslt
https://www.youtube.com/channel/UCdkonW ... IvDtnz2BiQ

[Linden]

2 little things
- your audio is not very good try an external microphone.
- freecad can do the math for you in the parameter line ie x position 700-30 mm
+plus, - minus, /devided by, * mltiply by are all supported as well as mm m inch foot and a bunch of other units

[cnirbhay]

2 little things
- your audio is not very good try an external microphone.
- freecad can do the math for you in the parameter line ie x position 700-30 mm
+plus, - minus, /devided by, * mltiply by are all supported as well as mm m inch foot and a bunch of other units

Yes, I agree. I'll try to improve. Thanks for the valuable feedback.