Many Thanks to the great developper Team !

[laurent_parti]

Hi all,

I'm not sure this is the good place to post but I try anyway .

I use FreeCAD since a while and follow the developpers hard work quite on a daily basis. Each time I had a concern with the soft, I was greatly help by the team. I do really appreciate all those efforts. The soft is better & better. I not able to program but I want to bring my stone and thanks all the developpers:

I share information on my channel for machinist community and I could not resist to make a short and hot recommandation for FreeCAD on my channel on which I have 570+ subscribers and 112 000 + views.

It is my way to thanks all of developper and the great FreeCAD Team .

https://www.youtube.com/watch?v=bP7bm6V ... svx0z6G6WQ

Laurent

[NormandC]

Hello Laurent,

I'm not sure this is the good place to post

I was not sure myself either. You do show a very cool machine design in your video, but you do not mention it in this topic; so I finally moved your topic to the "Open discussion" forum, but I left a "ghost topic" in the original place (in phpBB lingo this is a link).

BTW this is another quite eloquent demonstration that even without the "Assembly module" yet being in FreeCAD, you can do assemblies!

Thanks for being a FreeCAD ambassador!

P.S. Just so you know, as far as I know only the French people use the "soft" diminutive for software. I believe English-speaking people use "app", but it may be used specifically for apps on a smart phone...

[mario52]

hello
it's nice that you do, when I have time I will work my macro for cnc.

Bonjour
c'est sympa ce que vous faites, quand j'aurai le temps je travaillerai ma macro pour la cnc.
mario

[danielfalck]

hello
it's nice that you do, when I have time I will work my macro for cnc.

Bonjour
c'est sympa ce que vous faites, quand j'aurai le temps je travaillerai ma macro pour la cnc.
mario

Hi mario52,
Interesting macro, with good documentation!
One question that I have:
Is your license for that macro GPLv3? You might want to change it to LGPLv2 or BSD to be compatible with FreeCAD's license, just in case your macro gets included in the FreeCAD base install someday.

[laurent_parti]

Hello Laurent,

I'm not sure this is the good place to post

I was not sure myself either. You do show a very cool machine design in your video, but you do not mention it in this topic; so I finally moved your topic to the "Open discussion" forum, but I left a "ghost topic" in the original place (in phpBB lingo this is a link).

BTW this is another quite eloquent demonstration that even without the "Assembly module" yet being in FreeCAD, you can do assemblies!

Thanks for being a FreeCAD ambassador!

P.S. Just so you know, as far as I know only the French people use the "soft" diminutive for software. I believe English-speaking people use "app", but it may be used specifically for apps on a smart phone...

Thansk Normandc

[laurent_parti]

hello
it's nice that you do, when I have time I will work my macro for cnc.

Bonjour
c'est sympa ce que vous faites, quand j'aurai le temps je travaillerai ma macro pour la cnc.
mario

Hi Mario, a CNC postprocessor inside FreeCAD will be really cool

[laurent_parti]

Hi all,

My project si on going. If you want to see same metal & CNC work just click the link below:

https://www.youtube.com/watch?v=PSaxDw5XF4I

Laurent