[new mini feature] Sketcher Segments per Geometry

Info about new implemented features, classes, modules or APIs. Might get technical!
Posts: 1616
Joined: Sun May 04, 2014 3:16 pm

[new mini feature] Sketcher Segments per Geometry

Postby abdullah » Mon Mar 13, 2017 9:55 pm

In the help forum there was some complain about teselation in the sketcher (linked to bsplines that can get really long).

Some time ago I implemented an option to increase the segments together with some improvements for BSplines and I forgot about it. Today I rediscovered it and decided to post here to create awareness:

SegmentsPerGeometry.png (39.97 KiB) Viewed 460 times

As said, a mini feature... ;)
Posts: 4693
Joined: Fri Aug 29, 2014 12:45 am
Location: Saint-Petersburg, Russia

Re: [new mini feature] Sketcher Segments per Geometry

Postby DeepSOIC » Mon Mar 13, 2017 9:59 pm

very nice, thanks! I wanted it occasionally, when working with thin rings (concentric circles with somewhat small difference in radii).
Posts: 1145
Joined: Tue Feb 21, 2012 8:07 pm
Location: Torino - Italy

Re: [new mini feature] Sketcher Segments per Geometry

Postby renatorivo » Tue Mar 14, 2017 5:57 pm

Menu Edit->Preferences->Sketcher->General
Posts: 5013
Joined: Mon Dec 12, 2011 4:45 pm

Re: [new mini feature] Sketcher Segments per Geometry

Postby triplus » Fri Mar 17, 2017 9:52 pm

Indeed default value usually works good but in special use cases the result on the screen can look bad. Being able to fix that by increasing the segments value is therefore a nice addition. Thanks for adding the configurable option. And as you did a good job with this feature announcement and provided the corresponding image and everything. To raise awareness for another of such mini features i decided to mention it here.


Font size value is now being used for the "blue" text too. I remember occasionally users asked if the font size can be made configurable by the user. Now the user can configure it.

https://forum.freecadweb.org/viewtopic. ... 30#p162999