NiCr: CNC Hot Wire Cutter
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
NiCr: CNC Hot Wire Cutter
Hi!
I'm happy to announce that I'm publishing my CNC Hot Wire Foam Cutter (or simply NiCr, way shorter name) as an OpenSource/Hardware project.
A little video about it:
https://www.youtube.com/watch?v=iOVO2aQ5I9E
It has been designed with FreeCAD and also uses it to create the toolpath from 3D shapes.
Some pictures of the machine inside FreeCAD:
It has several interesting features like coreXY motion, arduino&ramps electronics and more, I have published a more detailed description here:
http://linuxforanengineer.blogspot.com. ... /nicr.html
I hope to upload code and 3D parts soon (FreeCAD workbench is almost ready )
EDITED: Github repo: https://github.com/JMG1/NiCr
Edited 2: Workbench demo video https://www.youtube.com/watch?v=8snH_p_ ... e=youtu.be
Javier.
I'm happy to announce that I'm publishing my CNC Hot Wire Foam Cutter (or simply NiCr, way shorter name) as an OpenSource/Hardware project.
A little video about it:
https://www.youtube.com/watch?v=iOVO2aQ5I9E
It has been designed with FreeCAD and also uses it to create the toolpath from 3D shapes.
Some pictures of the machine inside FreeCAD:
It has several interesting features like coreXY motion, arduino&ramps electronics and more, I have published a more detailed description here:
http://linuxforanengineer.blogspot.com. ... /nicr.html
I hope to upload code and 3D parts soon (FreeCAD workbench is almost ready )
EDITED: Github repo: https://github.com/JMG1/NiCr
Edited 2: Workbench demo video https://www.youtube.com/watch?v=8snH_p_ ... e=youtu.be
Javier.
Last edited by JMG on Mon Jan 04, 2016 9:12 pm, edited 2 times in total.
FreeCAD scripts, animations, experiments and more: http://linuxforanengineer.blogspot.com.es/
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Re: NiCr: CNC Hot Wire Cutter
Impressive.
- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: NiCr: CNC Hot Wire Cutter
Oh yes it is. Impressive. Should I start building one, I wonder...
Re: NiCr: CNC Hot Wire Cutter
Whoa! This thing is huge!
If I understood well, an G-Code like code is generated in FreeCAD and interpreted by AVR? Can you share some info about buffering commands? Are you sending commands in packets, or full code before staring the cutter?
If I understood well, an G-Code like code is generated in FreeCAD and interpreted by AVR? Can you share some info about buffering commands? Are you sending commands in packets, or full code before staring the cutter?
Re: NiCr: CNC Hot Wire Cutter
Thanks
DeepSOIC:
kwahoo:
Yes, you understood correctly. The nicr code is generated inside FreeCAD and sent by serial to the machine, at least, that is how it works at the moment. You can see an example on my test machine here (code included):
https://www.youtube.com/watch?v=VHL-ju65lEk
The only thing that keeps it from working perfectly are the delays between instructions, but seems easy to solve.
Also, one thing that is high in my to-do list is to create the possibility of reading the code from a SD card, like 3D printers do.
Any help and ideas with this will be greatly appreciated
DeepSOIC:
The question is... how can you live without one?Should I start building one, I wonder...
kwahoo:
Yes, you understood correctly. The nicr code is generated inside FreeCAD and sent by serial to the machine, at least, that is how it works at the moment. You can see an example on my test machine here (code included):
https://www.youtube.com/watch?v=VHL-ju65lEk
The only thing that keeps it from working perfectly are the delays between instructions, but seems easy to solve.
Also, one thing that is high in my to-do list is to create the possibility of reading the code from a SD card, like 3D printers do.
Any help and ideas with this will be greatly appreciated
FreeCAD scripts, animations, experiments and more: http://linuxforanengineer.blogspot.com.es/
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Re: NiCr: CNC Hot Wire Cutter
I started thinking about converting G-code on PC and streaming discrete steps to AVR with some buffering. I haven't tested this method yet, but I will when I'll finish my micro-CNC prototype.JMG wrote: The only thing that keeps it from working perfectly are the delays between instructions, but seems easy to solve.
Re: NiCr: CNC Hot Wire Cutter
In this video I'm sending the steps and direction directly (but without buffering) from a script that reads shape topology and transforms it to machine steps.converting G-code on PC and streaming discrete steps to AVR with some buffering.
https://www.youtube.com/watch?v=InJrinMZe4A
The data sent is a binary number with direction and step. I've also used this script modified to address directly the parallel port, eliminating the need of an AVR at the expense of using an old motherboard with parallel port.
I'm sure there are a lot of ways of doing the same thing, my preference is to send human-friendly instructions because there are easier to debug (separates nicely the software inside the computer and the firmware in the AVR).
Nice project, those sliders are of the kind used in furnitures (like retractable keyboard trays)?
Javier.
FreeCAD scripts, animations, experiments and more: http://linuxforanengineer.blogspot.com.es/
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Re: NiCr: CNC Hot Wire Cutter
Hi all.
The NiCr repository is here!!
https://github.com/JMG1/NiCr
The workbench Includes a .fcstd file with an example.
Javier.
The NiCr repository is here!!
https://github.com/JMG1/NiCr
The workbench Includes a .fcstd file with an example.
Javier.
FreeCAD scripts, animations, experiments and more: http://linuxforanengineer.blogspot.com.es/
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Re: NiCr: CNC Hot Wire Cutter
Code: Select all
Traceback (most recent call last):
File "...NiCr_Workbench/NiCrSimMachine.py", line 53, in onChanged
self.addMachineToDocument( fp.FrameDiameter, fp.XLength, fp.YLength, fp.ZLength )
<type 'exceptions.AttributeError'>: 'FeaturePython' object has no attribute 'YLength'
Traceback (most recent call last):
File "...NiCr_Workbench/NiCrSimMachine.py", line 53, in onChanged
self.addMachineToDocument( fp.FrameDiameter, fp.XLength, fp.YLength, fp.ZLength )
<type 'exceptions.AttributeError'>: 'FeaturePython' object has no attribute 'ZLength'
Re: NiCr: CNC Hot Wire Cutter
Thanks triplus for testing!
That annoying error shows when loading a workbench within a saved document, I think that is related to the save/load mechanism of the python objects It is not critical and does not disturb the workbench behavior.
That annoying error shows when loading a workbench within a saved document, I think that is related to the save/load mechanism of the python objects It is not critical and does not disturb the workbench behavior.
FreeCAD scripts, animations, experiments and more: http://linuxforanengineer.blogspot.com.es/
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly
Open source CNC hot wire cutter project (NiCr): https://github.com/JMG1/NiCr
Exploded Assembly Workbench: https://github.com/JMG1/ExplodedAssembly