Not at all, anybody is free to work on anything he/she likes...Kunda1 wrote:Point of clarification, that's for the FreeCAD devs to decide.
Would be great to have Bernd's input on this...
Not at all, anybody is free to work on anything he/she likes...Kunda1 wrote:Point of clarification, that's for the FreeCAD devs to decide.
@yorik I was speaking in the context of GSOC. In general, yes. But in regards to GSOC there are guidelines, right?yorik wrote:Not at all, anybody is free to work on anything he/she likes...Kunda1 wrote:Point of clarification, that's for the FreeCAD devs to decide.
Would be great to have Bernd's input on this...
Excellent.amrit3701 wrote: After studying and discussing in depth, I prepared a sample mock-up for the proposed rebar addon. Following are the stages for rebar detailing:
1. Selecting the desired structural element.
2. Executing the rebar addon.
3. Selecting the type of structural element. For eg: Beam, column, slab.
4. Filling the necessary inputs in the addon dialogue box as shown in the demonstration below (Example taken for beam):
This is some way a more practical reply with some very important points. @amrit3701, keep in mind these issues like a number of rebars with similar shape and their unique placement vectors. This will help you to code your addon in a more practical and appropriate way.It needs to keep in mind the same rebar shape could be on different places ins the same structure, means the same rebar shape could have more placement vectors, or the other world around different placement vectors of rebar shapes could have the same rebar shape.
- on the material rebar bill all the equal rebar shape are put together
Very important note. A rebar model or rebar drawing without the rebar material bill is nearly useless. Because this is what the manufactor needs.
A simple daily example of a drawing, a material bill and and ifc modell made with Allplan see here : viewtopic.php?f=18&t=17061&hilit=material+bill#p135030 I do not know about other countries, but this is what is needed to built reinforced structures in Switzerland.bernd wrote:a videa on how the task is done in Nemetschek Allplan ... https://youtu.be/3b4SnbRIFlQ
See for example the rebars of the little columns (no 4 and no 5) in the example of the last post. They have the same shape and the same no in the material bill, but each column rebar has its own placement vector and may be could have different distance between each rebar.cnirbhay wrote: @amrit3701, keep in mind these issues like a number of rebars with similar shape and their unique placement vectors. This will help you to code your addon in a more practical and appropriate way.
Yes, Sir, I've already gone through the file you've shared. I'll definitely take reference from that and Allplan software too. Also, I'll be consulting you and taking your precious advice throughout the project.bernd wrote:A simple daily example of a drawing, a material bill and and ifc modell made with Allplan see here : viewtopic.php?f=18&t=17061&hilit=material+bill#p135030 I do not know about other countries, but this is what is needed to built reinforced structures in Switzerland.