Search found 590 matches
- Sat Apr 20, 2024 8:09 am
- Forum: Форум на русском языке
- Topic: Кто посоветует рабочий подход к способу создания модели арт-объекта?
- Replies: 23
- Views: 10213
Re: Кто посоветует рабочий подход к способу создания модели арт-объекта?
Отвечу сам себе. Дублирование последнего в наборе эскиза и его смещение со включением в список эскизов, используемых для построения, решает вопрос частично - вопреки логики степень поверхности Max degree в варианте 2, что ранее давало самые хорошие результаты, не работает. Работет 3, 4 и 5 уже рисуе...
- Wed Apr 17, 2024 7:57 pm
- Forum: Форум на русском языке
- Topic: Кто посоветует рабочий подход к способу создания модели арт-объекта?
- Replies: 23
- Views: 10213
Re: Кто посоветует рабочий подход к способу создания модели арт-объекта?
Продолжим. Вот новый затык. Ура, штатно открывается во всех версиях. Имеем группу эскизов С0-Cend. Лофт из Парт штатно создает объект. Но Объединение с плоской подложкой приводит к поломке. Хорошо, идем в ПартДиз, создаем тело-подложку, над ним делаем по этим же эскизам Лофт. Все идет хорошо до доба...
- Wed Apr 10, 2024 7:30 am
- Forum: Форум на русском языке
- Topic: Производительность Питона - "В Python встроен JIT-компилятор"
- Replies: 0
- Views: 543
Производительность Питона - "В Python встроен JIT-компилятор"
Никто не знает, они это будут включать? - http://pda.opennet.ru/opennews/art.shtml?num=60966
- Thu Apr 04, 2024 7:33 pm
- Forum: Path/CAM
- Topic: Path Engrave generates multiple passes for edges
- Replies: 7
- Views: 589
Re: Path Engrave generates multiple passes for edges
You could: - replace Mod/Path/Path/Op/Engrave.py with downloaded from https://forum.freecad.org/viewtopic.php?p=676528#p676467 ; Colleague, a little earlier renamed Path to CAM and these kinds of tricks, as reported here, stopped working. Am I confusing things? Странно это звучит на чужом языке. Th...
- Sat Mar 23, 2024 7:59 am
- Forum: Форум на русском языке
- Topic: Проблема топологии наименований в основной ветке
- Replies: 9
- Views: 1079
Re: Проблема топологии наименований в основной ветке
Несмотря на то, что здесь - https://forum.freecad.org/viewtopic.php?p=746964#p746964 об этой новости ни слова, что-то произошло. Внезапно и без объявлений в основной ветке стали корректно открываться файлы проектов, созданных в ветке Лео. Что заслуживает отдельного упоминания - в основной ветке &quo...
- Mon Mar 18, 2024 6:59 pm
- Forum: Форум на русском языке
- Topic: Не редактируется модель (сделана в Link Branch)
- Replies: 4
- Views: 970
Re: Не редактируется модель (сделана в Link Branch)
Попытаться откатиться на предыдующую сборку. Сделана вчера новая, для разных платформ, кроме аппимаджа. Да, в основной ветке, последней сборке, тоже проблемы с перемещением размеров по ZZ, с выделением граней для CAM (Path).
- Fri Mar 15, 2024 1:38 pm
- Forum: Path/CAM
- Topic: size request.
- Replies: 9
- Views: 846
Re: size request.
The situation is a bit more complicated than that. It is clear that FC in the end with the help of post-processor creates a ready code of the whole code for the machine. But it often happens that we change only one operation in the whole project and it is not reasonable to save the whole project aga...
- Thu Mar 14, 2024 7:12 am
- Forum: Path/CAM
- Topic: size request.
- Replies: 9
- Views: 846
size request.
When creating g-code it is completely unnecessary to specify speed and coordinate in each line, and in general to repeat repetitive codes, even G1. This is very important for the size of files. Even Z19 is several times lighter than Z19.000000. In the case of 3D, Adaptive, these issues are extremely...
- Thu Mar 14, 2024 7:03 am
- Forum: Path/CAM
- Topic: Path is dead, long live CAM
- Replies: 13
- Views: 1744
Re: Path is dead, long live CAM
Btw, this particular solution is no longer needed. Path ordering is already fixed by @davidgilkaufman and as far as I know he is working on other improvements that hopefully will be available soon too. Better now than later. It would be just great if when significant changes appear on the forum the...
- Wed Mar 13, 2024 7:53 am
- Forum: Path/CAM
- Topic: Path is dead, long live CAM
- Replies: 13
- Views: 1744
Re: Path is dead, long live CAM
I disagree. More recently, there has already been "broken backwards compatibility". And now the effect has been polished. As a result, solutions like viewtopic.php?t=83988 no longer work.