Here is a link to a screen-cast. FC wouldn't fillet a solid created from the svg file so I used the stl from the OP. https://www.dropbox.com/s/9ts42uw0c6qyd3o/simplescreenrecorder-2021-04-18_10.10.06.webm?dl=0 Reading this thread I was going to answer along the lines of this video, thanks for makin...

next time around, can you please limit yourself to making one post per "project", what we see here is you getting acquainted with the software - which is perfectly fine, but the forum becomes less cluttered if that type of learning is bundled posts covering one "learning project" per post. A projec...

Any progress on this? I still can't install FC 0.20 on Xubuntu 20.04 from the PPA.

Hello, I hope that whoever is in charge of the freecad-daily PPA is aware that the daily builds of FreeCAD 0.20 are failing for Ubuntu 16.04, 20.4 and 20.10? If so, I'll just wait until it's resolved. Otherwise perhaps someone should take a look. The build for 18.04 seems to be working perfectly (an...

mendy wrote: ↑

Wed Mar 24, 2021 4:25 pm

Possibly check this.

https://forums.linuxmint.com/viewtopic.php?t=177432

This could be it.

I have a Dutch localised Xubuntu system and I prefer to use FreeCAD in English. To prevent problems with the decimal point I start FreeCAD with the command:

LC_NUMERIC=C freecad-daily

federico.carminati wrote: ↑

Wed Mar 24, 2021 4:44 pm

chrisb wrote: ↑

Tue Mar 23, 2021 10:16 pm

You can use different profiles, where you model the tubular flower already in the sketches.

Sorry, I do not understand, can you clarify what you mean? Thanks!

I assume he means, the desired wall thickness of your pipe can be done in the sketch itself.

So I would vote for the first or the last of the selected points being the center. I think you are right. (damn, I'm easy to convince...) It would probably make the whole process a bit less abstract and a bit more predictable for the end user. Next question: how should the X and Y axes of the new p...

chrisb wrote: ↑

Thu Mar 11, 2021 1:59 pm

MapPath is a property in the DataTab. It exists only together with certain attachment modes, such as normal to edge and the Frenet modes.

Thanks for your reply, I will have to explore this more closely at a later time.

C'est le bundle non compilé (pas d'exe même stand-alone et sur la machine que j'utilise en dépannage je n'ai pas d'AGL). If you download the .7z file for Windows it will contain the compiled .exe file you need to run FreeCAD 0.19. There is no installation program but you don't need it. Just unpack ...

try reproducing with the ProDark theme Not sure what revision of 0.19 you are using..which is a shame. ProDark seems to do a little better, but still not all items of the Combo view are themed (see below). And frankly it's a little too dark for my taste anyway. I know I'm being picky! So if this is...