Search found 24 matches

Go to advanced search

by eds
Sat Jun 17, 2017 4:40 am
Forum: Help on using FreeCAD
Topic: Draft Workbench Select Plane Issue
Replies: 6
Views: 840

Re: Draft Workbench Select Plane Issue

I think Yes. In other word, first view is an isometric or perspective view (I am not familiar with axiometric concept) and after go to the specific plane for do a 2d drawing, then go to the isometric or perspective view again to see the general drawing progress and so on with simple icon commands l...
by eds
Thu Jun 15, 2017 7:10 am
Forum: Help on using FreeCAD
Topic: Aligning sketch between edges of a padded part
Replies: 6
Views: 695

Re: Aligning sketch between edges of a padded part

If that's the use case it is far easier if you attach the sketch to one of the faces at the side and pocket through all. If you need the arbitrary solution and cannot reposition the object as sheinz showed you can use expressions to position the sketch. Watchout: you can use expressions for the pla...
by eds
Thu Jun 15, 2017 6:45 am
Forum: Help on using FreeCAD
Topic: Draft Workbench Select Plane Issue
Replies: 6
Views: 840

Re: Draft Workbench Select Plane Issue

Do you mean you want a dedicated button to select each drawing plane, and at the same time snap the view to axonometric? You can create macros for that. Create a macro and copy paste the following commands: Top view FreeCAD.DraftWorkingPlane.alignToPointAndAxis(FreeCAD.Vector(0,0,0), FreeCAD.Vector(...
by eds
Thu Jun 15, 2017 6:19 am
Forum: Help on using FreeCAD
Topic: Arch CutPlane - Error: tuple index out of range
Replies: 17
Views: 1818

Re: Arch CutPlane - Error: tuple index out of range

Works as expected on ubuntu 16.04 with FC 0.16 and 0.17

Try installing 0.17 on your PC, and see if it works.
by eds
Thu Jun 15, 2017 6:16 am
Forum: Help on using FreeCAD
Topic: How does one print what one has drawn?
Replies: 1
Views: 199

Re: How does one print what one has drawn?

Hi, do you mean print on paper as a drawing?
Please see the following tutorial:

https://www.freecadweb.org/wiki/Drawing_tutorial
by eds
Thu Jun 15, 2017 6:09 am
Forum: TechDraw
Topic: Issue encountered with draft projection in Techdraw
Replies: 17
Views: 1815

Re: Issue encountered with draft projection in Techdraw

Inserting "Group" using Draft "PutOnSheet" https://www.freecadweb.org/wiki/images/e/e9/Draft_PutOnSheet.svg seems to work. Draft "PutOnSheet" is inserting a Drawing workbench page, not a Techdraw page no? I can confirm Drawing / Drawing Dimensioning inserts the objects just fine. It's Techdraw's th...
by eds
Tue Jun 13, 2017 3:40 pm
Forum: TechDraw
Topic: Issue encountered with draft projection in Techdraw
Replies: 17
Views: 1815

Re: Issue encountered with draft projection in Techdraw

I'll try to test a few more cases when I have the chance, see what sort of tools/conditions reproduces it.
by eds
Mon Jun 12, 2017 2:30 am
Forum: TechDraw
Topic: Issue encountered with draft projection in Techdraw
Replies: 17
Views: 1815

Re: Issue encountered with draft projection in Techdraw

Please see attached the file.

I've made a compound and simple compound, and they seem to show up fine in the drawing. By selecting them and using New View.

I've tested with a simple arc, and they also show up in a way they are not supposed to.
by eds
Thu Jun 08, 2017 4:50 am
Forum: TechDraw
Topic: Issue encountered with draft projection in Techdraw
Replies: 17
Views: 1815

Issue encountered with draft projection in Techdraw

I encountered this issue while testing out Techdraw. When inserting the following drawing using the Techdraw Insert Draft Object, the results is as follows. I've also shown how the drawing was supposed to look like: draft projection techdraw.jpg It appears the problem is with the arc lines, both arc...
by eds
Sun Jun 04, 2017 4:48 am
Forum: Open discussion
Topic: A Review/Comment system with notes in FreeCAD?
Replies: 16
Views: 1745

Re: A Review/Comment system with notes in FreeCAD?

So there are Windows .exe's available for taskwarrior at any Cygwin mirror site, e.g. http://mirror.steadfast.net/cygwin/x86/release/task/ what does it take for a Windows user to be able to run one of those (besides installing Cygwin)? Windows 10 recently introduces a beta feature that is Windows S...

Go to advanced search