Search found 24 matches
- Sat Jun 17, 2017 4:40 am
- Forum: Help on using FreeCAD
- Topic: Draft Workbench Select Plane Issue
- Replies: 6
- Views: 1769
Re: Draft Workbench Select Plane Issue
I think Yes. In other word, first view is an isometric or perspective view (I am not familiar with axiometric concept) and after go to the specific plane for do a 2d drawing, then go to the isometric or perspective view again to see the general drawing progress and so on with simple icon commands l...
- Thu Jun 15, 2017 7:10 am
- Forum: Help on using FreeCAD
- Topic: Aligning sketch between edges of a padded part
- Replies: 6
- Views: 1853
Re: Aligning sketch between edges of a padded part
If that's the use case it is far easier if you attach the sketch to one of the faces at the side and pocket through all. If you need the arbitrary solution and cannot reposition the object as sheinz showed you can use expressions to position the sketch. Watchout: you can use expressions for the pla...
- Thu Jun 15, 2017 6:45 am
- Forum: Help on using FreeCAD
- Topic: Draft Workbench Select Plane Issue
- Replies: 6
- Views: 1769
Re: Draft Workbench Select Plane Issue
Do you mean you want a dedicated button to select each drawing plane, and at the same time snap the view to axonometric? You can create macros for that. Create a macro and copy paste the following commands: Top view FreeCAD.DraftWorkingPlane.alignToPointAndAxis(FreeCAD.Vector(0,0,0), FreeCAD.Vector(...
- Thu Jun 15, 2017 6:19 am
- Forum: Help on using FreeCAD
- Topic: Arch CutPlane - Error: tuple index out of range
- Replies: 17
- Views: 4264
Re: Arch CutPlane - Error: tuple index out of range
Works as expected on ubuntu 16.04 with FC 0.16 and 0.17
Try installing 0.17 on your PC, and see if it works.
Try installing 0.17 on your PC, and see if it works.
- Thu Jun 15, 2017 6:16 am
- Forum: Help on using FreeCAD
- Topic: How does one print what one has drawn?
- Replies: 1
- Views: 431
Re: How does one print what one has drawn?
Hi, do you mean print on paper as a drawing?
Please see the following tutorial:
https://www.freecadweb.org/wiki/Drawing_tutorial
Please see the following tutorial:
https://www.freecadweb.org/wiki/Drawing_tutorial
- Thu Jun 15, 2017 6:09 am
- Forum: TechDraw
- Topic: Issue encountered with draft projection in Techdraw
- Replies: 17
- Views: 4452
Re: Issue encountered with draft projection in Techdraw
Inserting "Group" using Draft "PutOnSheet" https://www.freecadweb.org/wiki/images/e/e9/Draft_PutOnSheet.svg seems to work. Draft "PutOnSheet" is inserting a Drawing workbench page, not a Techdraw page no? I can confirm Drawing / Drawing Dimensioning inserts the objects...
- Tue Jun 13, 2017 3:40 pm
- Forum: TechDraw
- Topic: Issue encountered with draft projection in Techdraw
- Replies: 17
- Views: 4452
Re: Issue encountered with draft projection in Techdraw
I'll try to test a few more cases when I have the chance, see what sort of tools/conditions reproduces it.
- Mon Jun 12, 2017 2:30 am
- Forum: TechDraw
- Topic: Issue encountered with draft projection in Techdraw
- Replies: 17
- Views: 4452
Re: Issue encountered with draft projection in Techdraw
Please see attached the file.
I've made a compound and simple compound, and they seem to show up fine in the drawing. By selecting them and using New View.
I've tested with a simple arc, and they also show up in a way they are not supposed to.
I've made a compound and simple compound, and they seem to show up fine in the drawing. By selecting them and using New View.
I've tested with a simple arc, and they also show up in a way they are not supposed to.
- Thu Jun 08, 2017 4:50 am
- Forum: TechDraw
- Topic: Issue encountered with draft projection in Techdraw
- Replies: 17
- Views: 4452
Issue encountered with draft projection in Techdraw
I encountered this issue while testing out Techdraw. When inserting the following drawing using the Techdraw Insert Draft Object, the results is as follows. I've also shown how the drawing was supposed to look like: draft projection techdraw.jpg It appears the problem is with the arc lines, both arc...
- Sun Jun 04, 2017 4:48 am
- Forum: Open discussion
- Topic: A Review/Comment system with notes in FreeCAD?
- Replies: 16
- Views: 3544
Re: A Review/Comment system with notes in FreeCAD?
So there are Windows .exe's available for taskwarrior at any Cygwin mirror site, e.g. http://mirror.steadfast.net/cygwin/x86/release/task/ what does it take for a Windows user to be able to run one of those (besides installing Cygwin)? Windows 10 recently introduces a beta feature that is Windows S...