Search found 558 matches

by jpg87
Thu Jul 29, 2021 6:24 am
Forum: Assembly
Topic: A2Plus Improve workbench assemblies
Replies: 3
Views: 1243

Re: A2Plus Improve workbench assemblies

I recently did 2 big projects that I would only do in Solidworks but I accepted the challenge of doing it in Freecad. However I felt that some features of the A2Plus workbench could be better. Hello, One thing escapes me: it looks like you work in the Realthunder branch ... and yet you are using A2...
by jpg87
Tue Jul 13, 2021 6:18 am
Forum: Assembly
Topic: Asm3 - assembly with ~200 fasteners.
Replies: 23
Views: 3089

Re: Asm3 - assembly with ~200 fasteners.

Need advise on my current project. Hello, for me there is no hesitation : an assembly element belongs to the same sub-assembly as the parts it links. On the other hand, I learned from the start of my studies in mechanical construction (a long time ago!) that in the representation of a project, only...
by jpg87
Mon Jul 12, 2021 3:07 pm
Forum: Assembly
Topic: Assembly3, A2plus, Assembly4? Get united!
Replies: 142
Views: 31185

Re: Assembly3, A2plus, Assembly4? Get united!

To ... ... ... and others ! First of all I must warn that as a simple user who understands nothing about internal problems in software programming, all terms like "App :: Standard Part, App :: DocumentObjectGroup, ..." are totally foreign to me. However, I still believe that the opinion of...
by jpg87
Sat Jul 03, 2021 7:27 am
Forum: Forum français
Topic: Plan maison; Freecad Arch, bonne ou mauvaise idée?
Replies: 17
Views: 1269

Re: Plan maison; Freecad Arch, bonne ou mauvaise idée?

J'ai commencé hier a faire un premier étage, et je rencontre déjà pas mal de galères: -difficulté à positionner des fenêtres ou portes de manière précise par rapport à une référence (angle de mur, autre porte...) -porte qui crée un "trou" dans le mur opposé sans raison apparente -déplacem...
by jpg87
Wed Jun 30, 2021 9:32 pm
Forum: Help on using FreeCAD
Topic: understanding "applications"
Replies: 7
Views: 513

Re: understanding "applications"

Can someone please give some guidance? in contrary to most people around here, I tend to recommend that a beginner starts with part wb, rather than part design wb. I'm not sure Part WB is the easiest way to start using FreeCAD. It seems interesting to me to consult this wiki page for this purpose, ...
by jpg87
Wed Jun 30, 2021 8:23 am
Forum: Help on using FreeCAD
Topic: Combining Multiple Bodies
Replies: 8
Views: 574

Re: Combining Multiple Bodies

I modeled a part by using two bodies in part design so that they can be exported separately, but it's essentially one part and the two bodies are touching each other. If I want to give this to a CNC manufacturing service to make it as a single part, I can select both bodies and export a single STEP...
by jpg87
Tue Jun 29, 2021 6:55 am
Forum: Forum français
Topic: Nervure d'aile en structure géodésique.
Replies: 11
Views: 1512

Re: Nervure d'aile en structure géodésique.

Je veux créer une aile en structure géodésique Bonjour, j'ai vu que cette demande n'a pas abouti, alors voici ma proposition : nervureAtrous.jpg Je crains que pour un usinage CNC il y ait des problèmes de contre dépouille, à moins qu'il existe des solutions auxquelles je n'ai pas pensé. Voici mon f...
by jpg87
Thu Jun 24, 2021 8:51 pm
Forum: Forum français
Topic: visibilité des objets dans une opération booléenne soustractive de partdesign
Replies: 5
Views: 496

Re: visibilité des objets dans une opération booléenne soustractive de partdesign

Activer Body par double-clic Sélectionner Body001 et faire un SubObject-Binder Glisser le Binder dans l'opération Booléenne Glisser Body001 en dehors du corps Cacher le Binder Body001, servant pour l'opération, peut être caché/affiché avec la barre espace. Si nécessaire on peut passer Bind Mode de ...
by jpg87
Thu Jun 17, 2021 5:36 pm
Forum: Help on using FreeCAD
Topic: all sharp edges need to be rouded
Replies: 9
Views: 925

Re: all sharp edges need to be rouded

Yes it looks better, I have noticed the same problem too with the fillets. The next challenge is how to make it thin. This function also requires some attention to the edges. They should be spaced enough to create fillets. Especially in outside thickness mode. Another approach. 0.7 mm wall (beyond ...
by jpg87
Tue Jun 15, 2021 7:01 pm
Forum: Help on using FreeCAD
Topic: all sharp edges need to be rouded
Replies: 9
Views: 925

Re: all sharp edges need to be rouded

could any one help me how to round all sharp edges in this tank (blow moulding) Hello, I did a lot of tests in PartDesagn WB, then Part WB, with several construction techniques. I noticed one thing: When using Loft, the created edges have difficulty accepting the fillets. Important note: I have mod...