Search found 46 matches

by Chriss
Tue Feb 20, 2024 9:02 pm
Forum: Help on using FreeCAD
Topic: Text on a curve surface?
Replies: 9
Views: 734

Re: Text on a curve surface?

Thank you for your help. I really appreciate your time and willing to help, you helped me very well. I understood the basics which was a really pain in my ... So, the blue rectangle is actually the areal where I can put a text or even draw some shape and everything in it will be projected on the &qu...
by Chriss
Sun Feb 18, 2024 1:24 am
Forum: Help on using FreeCAD
Topic: Text on a curve surface?
Replies: 9
Views: 734

Text on a curve surface?

Hi! I'm struggling to learn the correct way to work with text, most of curved surface but everything went me over my head. I read so many tutorials, watched so many videos, cheeked here on the forum and read the documentation on the freecad wiki but somehow I cant manage what I wish to do. Here is m...
by Chriss
Thu Feb 15, 2024 7:35 pm
Forum: Help on using FreeCAD
Topic: Create a real thread?
Replies: 15
Views: 1098

Re: Create a real thread?

Thank you for you replay.
It is really interesting resolution of the problem and a good result.

Thnank you very much.
by Chriss
Sat Feb 10, 2024 12:45 am
Forum: Help on using FreeCAD
Topic: Create a real thread?
Replies: 15
Views: 1098

Re: Create a real thread?

So, i didn't tried yet your advice, but tried all the above solutions and ended in an unsuccessful result. I assume the major problem is the spheric shape if the outer and inner walls. If the shape would be a flat wall I assume it would be more flexible. The spheric wall is more rigid and can withst...
by Chriss
Thu Feb 08, 2024 9:31 pm
Forum: Help on using FreeCAD
Topic: Create a real thread?
Replies: 15
Views: 1098

Re: Create a real thread?

Ok.
Thank you.
I really appreciate your help.
by Chriss
Thu Feb 08, 2024 8:43 pm
Forum: Help on using FreeCAD
Topic: Create a real thread?
Replies: 15
Views: 1098

Re: Create a real thread?

I'm also ising a nozzle 0.2mm and a print high of 0.2mm.
Do you think I should maybe switch to a nozzle like 0.4mm and a higher layer high like 0.3 or higher?
by Chriss
Thu Feb 08, 2024 7:55 pm
Forum: Help on using FreeCAD
Topic: Create a real thread?
Replies: 15
Views: 1098

Re: Create a real thread?

By "tilted at a 45 degree angle using supports" you mean I should tilt the part in the slicer 45 degree?
Like in the picture ?
I don't care about the nice, fancy surface, I care more about the functionality. :-)
by Chriss
Thu Feb 08, 2024 6:58 pm
Forum: Help on using FreeCAD
Topic: Create a real thread?
Replies: 15
Views: 1098

Re: Create a real thread?

Friend's thank you very much for your time and help, I did it almost perfect. I'm very happy. :-) I have another question related maybe to my construction, but probably not a theme for this forum, but maybe somebody can help me to solve it. I have to print on my 3D printer this part, I use PETG fila...
by Chriss
Sun Feb 04, 2024 4:08 pm
Forum: Help on using FreeCAD
Topic: Create a real thread?
Replies: 15
Views: 1098

Create a real thread?

Hi! I have a broken plastic part which I have to recreate in FreeCAD and print on a 3D printer. It is a simple tube which is 15mm height and a wall thickness of 1mm an inner diameter of 14mm, nothing special. But I have a thread on the inner side of the tube. The real thread has a pitch of 1.75mm an...
by Chriss
Fri Jan 19, 2024 1:42 pm
Forum: Help on using FreeCAD
Topic: How to backup the setting of FreeCAD
Replies: 3
Views: 291

Re: How to backup the setting of FreeCAD

Thank you for this info.

I will wait with the update.
I don't really need it.