Search found 44 matches

by anatolli
Thu May 31, 2018 12:42 pm
Forum: Forum in Deutsch
Topic: Bitte um Hilfe beim Zusammenbau von Teilen!
Replies: 59
Views: 9573

Re: Bitte um Hilfe beim Zusammenbau von Teilen!

Neues Modell durch Zoomen mag schon sein, aber Abhängigkeiten müssen stringent bleiben. Vereinfacht gesagt is klar, dass häufig Fälle auftreten die nicht eindeutig sind, man könnte (bzw. muss) aber Einfachheithalber eben dann den Benutzer zu Hilfe treten lassen und ihn bestimmen lassen welche Abhäng...
by anatolli
Wed May 30, 2018 11:23 am
Forum: Forum in Deutsch
Topic: Bitte um Hilfe beim Zusammenbau von Teilen!
Replies: 59
Views: 9573

Re: Bitte um Hilfe beim Zusammenbau von Teilen!

@chrisb: sollte kein Vorwurf sein. Finde es aber trotzdem interessant, dass sich an dem Problem nicht sonderlich gestoßen wird. Um "Topo-naming" ordentlichz zu implementieren bedarf es mehr als nur Programmieren zu können (das kann ich, ist Teil meines Berufes), auch viel Erfahrung mit dem...
by anatolli
Wed May 30, 2018 10:42 am
Forum: Forum in Deutsch
Topic: Bitte um Hilfe beim Zusammenbau von Teilen!
Replies: 59
Views: 9573

Re: Bitte um Hilfe beim Zusammenbau von Teilen!

Hallo! Im Anhang ist die fast fertige Hobelbank. Fast deshalb ,da die Vorder- u. Hinterzange noch nicht implementiert sind. Die Zeichnung ist leider nicht optimal auf die Mastersketches aufgebaut und enthält sicher noch logische Fehler, warum steht im Text. Ich müsste sie nochmals zeichnen, dazu hab...
by anatolli
Wed May 23, 2018 9:09 am
Forum: Forum in Deutsch
Topic: Bitte um Hilfe beim Zusammenbau von Teilen!
Replies: 59
Views: 9573

Re: Bitte um Hilfe beim Zusammenbau von Teilen!

@chrisb: Beschäftige mich erst seit 3 Wochen mit FCD. Mastersketchs: So werd ichs machen.

anatolli
by anatolli
Wed May 23, 2018 7:21 am
Forum: Forum in Deutsch
Topic: Bitte um Hilfe beim Zusammenbau von Teilen!
Replies: 59
Views: 9573

Re: Bitte um Hilfe beim Zusammenbau von Teilen!

@chrisb;
Wieder viel gelernt, schön langsam wirds klarer. Mit dem Anhängen der Datum planes muss ich mich noch beschäftigen. Dass auch Punkte mit vertical constraints versehen werden können war mir auch neu. constraint 34.

vielen Dank
anatolli
by anatolli
Tue May 22, 2018 9:51 pm
Forum: Help on using FreeCAD
Topic: Fundamental problem with switching position of shapebinder!
Replies: 15
Views: 1409

Re: Fundamental problem with switching position of shapebinder!

@DeepSOIC; thanks for explanations for positioning datum planes ==> sucess!!

I will try to redraw the Modell like your suggestions. If i have done it, i will post it here, maybe you can confirm the drawing.

thanks a lot
anatolli
by anatolli
Tue May 22, 2018 9:33 pm
Forum: Help on using FreeCAD
Topic: Fundamental problem with switching position of shapebinder!
Replies: 15
Views: 1409

Re: Fundamental problem with switching position of shapebinder!

So the next bug with shapebinder. I have attached the file. I wanted to create a shabebinder from sketch01. Please have a look how the shapebinder002 lines are positioned. They arent on the right coordinates ? Bug? Edit: I am sorry to bother you, after i closed the File and reloded it it works like ...
by anatolli
Tue May 22, 2018 8:48 pm
Forum: Help on using FreeCAD
Topic: Fundamental problem with switching position of shapebinder!
Replies: 15
Views: 1409

Re: Fundamental problem with switching position of shapebinder!

So how to put the Datum plane on the shapebinder line? I have tried it, but didnt get sucess on the attached File. On xy plane its no problem, because shapbinder line is on xy. But i want the datum plane to xz plane to draw the "Leg" (german word "Fuss"). If i use the "Objec...
by anatolli
Tue May 22, 2018 7:58 pm
Forum: Help on using FreeCAD
Topic: Fundamental problem with switching position of shapebinder!
Replies: 15
Views: 1409

Re: Fundamental problem with switching position of shapebinder!

In the meantime i have also tried to make one hole a little bit differnt to the other ==> it works fine. No wrong mapping!
But i am very interesting in working on a more stable workflow, so i am looking forward to your explanations.

thanks
anatolli
by anatolli
Tue May 22, 2018 7:50 pm
Forum: Help on using FreeCAD
Topic: Fundamental problem with switching position of shapebinder!
Replies: 15
Views: 1409

Re: Fundamental problem with switching position of shapebinder!

@DeepSOIC; So i made a Shapebinder with Edges instead of faces. But after that, i can't figure out how to bring the xz plane (from "Fuss") of the sketch in order to the shapebinder Edges in Y orientation. If i made a face shapebinder, i can simple switch on the face to put the sketch on it...