Search found 18 matches

Go to advanced search

by Packmers
Mon Aug 26, 2019 2:09 pm
Forum: Draft, Arch & BIM
Topic: Draft Text -> Font problem
Replies: 4
Views: 295

Re: Draft Text -> Font problem

Hi
I found, it works, when I use a default Font, in the setup of draw.
It doesn't work if I select and load the font during the Shape- Generating.
packmers... :|
by Packmers
Fri Aug 23, 2019 7:22 pm
Forum: Draft, Arch & BIM
Topic: Draft Text -> Font problem
Replies: 4
Views: 295

Draft Text -> Font problem

Hi i tried to generate a text with draft on a solid. I works until i've to select a font. Then comes a failure in the output an it hangs on the font input. no shape is generated. I tried with different fonts- no chance. When I write i.e. "kjkjkj" (without selecting an ttf) it produces a shape on the...
by Packmers
Tue Jun 25, 2019 11:26 am
Forum: Path/CAM
Topic: GCODE Export not with FreeCad19?
Replies: 16
Views: 469

Re: GCODE Export not with FreeCad19?

Hi Chris, I tried to find it, but it seems it comes with the Work-Coordinate-Setup. (begin operation: Fixture) (machine: not set, mm/min) G54 G0 Z13.500 (finish operation: Fixture) Maybe in the future it will work, because at the moment this setup is not working in general - it goes always to G54|Fi...
by Packmers
Tue Jun 25, 2019 10:23 am
Forum: Path/CAM
Topic: GCODE Export not with FreeCad19?
Replies: 16
Views: 469

Re: GCODE Export not with FreeCad19?

Ok, I need to play with the settings. I think the way it's implemented now is the right way, so it's a part of the path-wb where it is used only. Ok, I know its still under development, but it was very confusing why the g-code- export was disapearing :shock: Is there a posibility to switch off the C...
by Packmers
Tue Jun 25, 2019 6:25 am
Forum: Path/CAM
Topic: GCODE Export not with FreeCad19?
Replies: 16
Views: 469

Re: GCODE Export not with FreeCad19?

Hi
thanks for the responses.
Finaly I found the new function. Where do I have to place my post-processor now? Before it was in the macro- directory, or not?

PACKMERS :shock:
by Packmers
Tue Jun 18, 2019 1:04 pm
Forum: Path/CAM
Topic: GCODE Export not with FreeCad19?
Replies: 16
Views: 469

GCODE Export not with FreeCad19?

Hi, I like to see the new features, so I use often the latest Version of FreeCAD. Unfortunly in the 19 is no export for G-Code. Is it a bug, or a configuration problem. Finaly I tried the latest released 18. there the export is possible, but I've new problems with my post-processor: i.e. "a bytes-li...
by Packmers
Thu Jan 10, 2019 2:17 pm
Forum: Path/CAM
Topic: Engraving two shape-strings G-Code has a failure
Replies: 5
Views: 417

Re: Engraving two shape-strings G-Code has a failure

Because my rights not for attach files I place the RAW G-Code here: its two shapes with the text "10 1" and "170 161" the "10 1" is graved twice I placed some comments with >>> (Engrave) G0 F0.000000 Z12.501000 G0 F20.000000 X2.397448 Y-6.672477 Z12.501000 G0 F0.000000 X2.397448 Y-6.672477 Z10.50100...
by Packmers
Wed Jan 09, 2019 5:52 pm
Forum: Path/CAM
Topic: Engraving two shape-strings G-Code has a failure
Replies: 5
Views: 417

Engraving two shape-strings G-Code has a failure

Hi I've found a small problem with the G-Code ist generated when I use 2 or more different shape-strings. After the first shape is finished the G-Code is G0 X_newpos Y_newpos Z_clearancehigh - this produces a scratch. Should be first G0 Z_clearance and the an other G0 to the new position. It works c...
by Packmers
Tue Dec 18, 2018 10:03 pm
Forum: Path/CAM
Topic: Using TOOL-Change
Replies: 16
Views: 1224

Re: Using TOOL-Change

Hi finaly I found how it works, but I find it strange: To get the tool-change it's necessary to select the tools additional to the operations, when I start the post-processor, after this it implements the tool-change and the Spindle-Speed. But its not 100% sorted. For my understandig, it should be e...
by Packmers
Wed Nov 21, 2018 8:29 pm
Forum: Forum in Deutsch
Topic: Shape-Strings zusammenfassen
Replies: 1
Views: 172

Shape-Strings zusammenfassen

Hallo! Ich möchte mit der Path- Gravur Funktion, mehrere Gravuren erzeugen. Jedoch habe ich noch keinen Weg gefunden Strings zusammenzufassen um die dann nur mit einen Path-Job in einer nc-Datei zusammenzufassen. Noch schöner wäre es diese Strings mit den anderen Fräs- und Bohrarbeiten in einen Job ...

Go to advanced search