Hi
I found, it works, when I use a default Font, in the setup of draw.
It doesn't work if I select and load the font during the Shape- Generating.
packmers...

Hi i tried to generate a text with draft on a solid. I works until i've to select a font. Then comes a failure in the output an it hangs on the font input. no shape is generated. I tried with different fonts- no chance. When I write i.e. "kjkjkj" (without selecting an ttf) it produces a sh...

Hi Chris, I tried to find it, but it seems it comes with the Work-Coordinate-Setup. (begin operation: Fixture) (machine: not set, mm/min) G54 G0 Z13.500 (finish operation: Fixture) Maybe in the future it will work, because at the moment this setup is not working in general - it goes always to G54|Fi...

Ok, I need to play with the settings. I think the way it's implemented now is the right way, so it's a part of the path-wb where it is used only. Ok, I know its still under development, but it was very confusing why the g-code- export was disapearing :shock: Is there a posibility to switch off the C...

Hi
thanks for the responses.
Finaly I found the new function. Where do I have to place my post-processor now? Before it was in the macro- directory, or not?

PACKMERS

Hi, I like to see the new features, so I use often the latest Version of FreeCAD. Unfortunly in the 19 is no export for G-Code. Is it a bug, or a configuration problem. Finaly I tried the latest released 18. there the export is possible, but I've new problems with my post-processor: i.e. "a byt...

Because my rights not for attach files I place the RAW G-Code here: its two shapes with the text "10 1" and "170 161" the "10 1" is graved twice I placed some comments with >>> (Engrave) G0 F0.000000 Z12.501000 G0 F20.000000 X2.397448 Y-6.672477 Z12.501000 G0 F0.000000 ...

Hi I've found a small problem with the G-Code ist generated when I use 2 or more different shape-strings. After the first shape is finished the G-Code is G0 X_newpos Y_newpos Z_clearancehigh - this produces a scratch. Should be first G0 Z_clearance and the an other G0 to the new position. It works c...

Hi finaly I found how it works, but I find it strange: To get the tool-change it's necessary to select the tools additional to the operations, when I start the post-processor, after this it implements the tool-change and the Spindle-Speed. But its not 100% sorted. For my understandig, it should be e...

Hallo! Ich möchte mit der Path- Gravur Funktion, mehrere Gravuren erzeugen. Jedoch habe ich noch keinen Weg gefunden Strings zusammenzufassen um die dann nur mit einen Path-Job in einer nc-Datei zusammenzufassen. Noch schöner wäre es diese Strings mit den anderen Fräs- und Bohrarbeiten in einen Job ...