Search found 59 matches

Go to advanced search

by dan-miel
Wed Jul 17, 2019 4:30 pm
Forum: Assembly
Topic: Assembly 4 workbench
Replies: 41
Views: 5208

Re: Assembly 4 workbench

Zolko. Can you please try to replace the InitGui.py file in Mod_Asm4 with the one attached ? I use some nice frames for comments in my code, in the attached one I removed them: Code: Select all""" ╔═══════════════════════════════════════════════╗ ║ Initialize the workbench ║ ╚═══════════════════════...
by dan-miel
Wed Jul 17, 2019 5:31 am
Forum: Assembly
Topic: Assembly 4 workbench
Replies: 41
Views: 5208

Re: Assembly 4 workbench

Alternatively, burning 13 black candles positioned on a pentacle wouldn't be less scientific. Zolko. I'm sometimes I'm slow and other times I'm slower. I opened the Report panel and these error message were there. Do they help at all? During initialization the error "inconsistent use of tabs and sp...
by dan-miel
Tue Jul 16, 2019 8:03 pm
Forum: Assembly
Topic: Assembly 4 workbench
Replies: 41
Views: 5208

Re: Assembly 4 workbench

I suggest you remove Mod_Asm4 entirely from that .../Mod directory, and replace it with a freshly downloaded Asm4 ? Done. I restarted machine, again. didn't make any difference. there is one file more: asm4wb_locator.pyc (which is the Python bytecode of asm4wb_locator.py). Don't know whether that m...
by dan-miel
Tue Jul 16, 2019 7:31 pm
Forum: Assembly
Topic: Assembly 4 workbench
Replies: 41
Views: 5208

Re: Assembly 4 workbench

Zolko wrote:
Tue Jul 16, 2019 6:47 pm
Can-you post here the ZIP of the Mod_Asm4 directory that you have currently in C:\Users\dan-m\AppData\Roaming\FreeCAD\Mod ?
Here is the folder. I 'll start redownloading.
Dan
by dan-miel
Tue Jul 16, 2019 4:37 pm
Forum: Assembly
Topic: Assembly 4 workbench
Replies: 41
Views: 5208

Re: Assembly 4 workbench

The two paths I have for Mod folders are: 1: C:\FreeCAD-asm3-Win64-Py3-Qt5-20190703\Mod 2: C:\Users\dan-m\AppData\Roaming\FreeCAD\Mod I have not been able to get Assembly 4 to show again, it doesn't make a difference if the asm4 folder is in #1 or #2 location. I did notice that a couple of other wor...
by dan-miel
Mon Jul 15, 2019 10:26 pm
Forum: Assembly
Topic: Assembly 4 workbench
Replies: 41
Views: 5208

Re: Assembly 4 workbench

I have not had much luck. I was trying it on my laptop which I reformatted and now I have tried my desktop. FreeCAD 18 shows the Assembly 4 program but FC19 does not show it. It did show up once when I had put both files into both Mod directories but after I removed the file from the FC19 directory ...
by dan-miel
Mon Jul 15, 2019 3:07 am
Forum: Assembly
Topic: Assembly 4 workbench
Replies: 41
Views: 5208

Re: Assembly 4 workbench

I'm using Windows 10. Assembly 3 is in the drop down and it starts. I started FreeCAD from the command line but no messages showed up. As long as it sounds like I have the correct files I'll try it on my other computer and let you know if it works there. I had to reformat this drive a while back so ...
by dan-miel
Sun Jul 14, 2019 2:07 am
Forum: Assembly
Topic: Assembly 4 workbench
Replies: 41
Views: 5208

Re: Assembly 4 workbench

I would like to try assembly 4 but I'm having trouble getting it going. I downloaded FreeCAD-asm3-Win64-Py3-Qt5-20190703, FreeCAD_Assembly4-master and FreeCAD-LinkStage3. Extracted all three. I put Mod_Asm4 into the mod directory, started FreeCAD .19 in the bin directory. There is not an assembly 4 ...
by dan-miel
Fri Jul 12, 2019 5:38 pm
Forum: Assembly
Topic: Another approach to assembly solver (A2plus)
Replies: 1623
Views: 56484

Re: Another approach to assembly solver (A2plus)

kbwbe wrote:
Fri Jul 12, 2019 4:48 pm
IMHO this is not possible. A2plus only detects numerical value divergation summed up over all constraints. So it is extremly difficult to say which constraint is failing.
Thanks for the response Kbwbe.
Dan.
by dan-miel
Fri Jul 12, 2019 1:47 pm
Forum: Assembly
Topic: Another approach to assembly solver (A2plus)
Replies: 1623
Views: 56484

Re: Another approach to assembly solver (A2plus)

probably the classical topological naming problem of FreeCAD This problem exists in all CAD systems, more or less severe, and in FreeCAD it's very severe I think the main reason that FreeCAD's seems so severe is that the error message just says to delete the last mate. In many cases the last mate m...

Go to advanced search