Feedback from the machine supplier was more about the tool changing sequence rather than the G code being G01 or G1. It looks like that part of it (the G01 or G1) is inconsequential for the Syntec controller (atleast the 60W-E). What they don't see the use in is the calling of M6 for tool changing a...

The controller apparently needs the Syntex as example 1 below... G00 X123 Y123 Z123 G01 X123 Y123 Z123 G02 X123 Y123 Z123 apparently ? Have you checked with the seller or others using the same control ? I'm only working on a hunch but don't most controls treat G01 and G1 as the same command ? Answe...

Good evening herbk, thank you for the reply and education. I will try that tomorrow morning. The controller apparently needs the Syntex as example 1 below... G00 X123 Y123 Z123 G01 X123 Y123 Z123 G02 X123 Y123 Z123 Etc. What I can get out from the currently available post processors however is examp...

Hi All, Hope someone can help me, I have taught my self how to use freecad path (still a newbie) and I am going to get a 3 axis CNC machine with a Syntec 60W-E controller. I have from the CNC manufacturer a post processor for Aspire but I don't have that software and so I am trying to modify linux C...

I found out what I was doing wrong. In most of the tutorials that teach how to calculate drag and lift, they show the process of extract block > generate surface normals > calculate etc. However what I missed out was that I had to go to the very top of the tree on the left and load all data/mesh/geo...

Hi All, Absolutely amazed at how well the CFD workbench runs and the smooth workflow. I am able to run simulations following some tutorials and now I am trying to get drag and lift data for a model I am working on. I have followed the various tutorials many times and know the process backwards thank...

versionFunctions: Not supported on OpenGL ES" This looks like a GPU driver related issue. If you have some other hardware (PC) with a different (modern) GPU available, please test the procedure there first. Hi Triplus, the error was due to the integrated Intel GPU, however although paraview do...

versionFunctions: Not supported on OpenGL ES" This looks like a GPU driver related issue. If you have some other hardware (PC) with a different (modern) GPU available, please test the procedure there first. Hi Triplus, at home i do not have another more modern computer. I am trying to run this...

I have updated the previous post by removing the quote code.

Hi All, I have just installed the cfdof module in freecad to start some trials and I have come up with 1 semi major issue and 1 major issue. 1st) when I create a volume (a rectangular section which is 40mmx40mmx2500mm) in part design and create the container for open foam and try to mesh the volume ...