Search found 422 matches
- Tue Apr 23, 2024 4:11 am
- Forum: Help on using FreeCAD
- Topic: PartDesign Thickness doesn't cross planes?
- Replies: 4
- Views: 235
PartDesign Thickness doesn't cross planes?
Still working on joining two tubes at an angle. I've tried using thickness on the lower section before creating the secondary reference plane, then again on the top section; in this case, I can't see through the secondary plane. I've tried applying it after the compound object is built; in this case...
- Mon Apr 22, 2024 10:30 pm
- Forum: Help on using FreeCAD
- Topic: Joining two cylinders at an angle
- Replies: 7
- Views: 363
Re: Joining two cylinders at an angle
Thank you! I got it to work with an additive loft, drawing two elipses and aligning them with the projection of the cutoff tube's top.
- Mon Apr 22, 2024 10:17 pm
- Forum: Help on using FreeCAD
- Topic: Joining two cylinders at an angle
- Replies: 7
- Views: 363
Re: Joining two cylinders at an angle
PartDesign_AdditivePipe ? Not sure what you're suggesting. I've used additive pipe numerous times. But what would the profile, and the path, be? If the path follows the top outside outline of the cutoff tube, the profile to meet with concentric circles some distance above z=0 on the reference plane...
- Mon Apr 22, 2024 7:15 pm
- Forum: Help on using FreeCAD
- Topic: Joining two cylinders at an angle
- Replies: 7
- Views: 363
Joining two cylinders at an angle
How do I draw two cylinders oriented at different angles and join them? Problem 1: What is the easiest way to create a reference plane whose center is above the origin? I started by slicing the first cylinder at the desired angle based on a simple triangle, then creating a plane based on the top fac...
- Sat Apr 20, 2024 3:40 pm
- Forum: Help on using FreeCAD
- Topic: Problem making simple cut work (Part WB, Helix)
- Replies: 7
- Views: 366
Re: Problem making simple cut work (Part WB, Helix)
Thanks @chrisb and @drmacro . Wanted to make sure I wasn't missing something.
- Sat Apr 20, 2024 3:35 pm
- Forum: Help on using FreeCAD
- Topic: bug? PartDesign helix does not track some spreadsheet alias changes
- Replies: 5
- Views: 248
Re: bug? PartDesign helix does not track some spreadsheet alias changes
You delete the alias name from the Spreadsheet. At that point, what is the helix supposed to do? It would not be absurd, if it behaved like in other cases, e.g. when you delete a cube of which you referenced the length, where the value is kept, and an error is shown in the tree. This is what I was ...
- Sat Apr 20, 2024 3:28 am
- Forum: Help on using FreeCAD
- Topic: bug? PartDesign helix does not track some spreadsheet alias changes
- Replies: 5
- Views: 248
bug? PartDesign helix does not track some spreadsheet alias changes
Not sure if this is intended behavior or not: If I have a PartDesign SubtractiveHelix whose Height parameter is set to the named alias of a spreadsheet cell, and I delete that name as part of rearranging the spreadsheet, the PartDesign SubtractiveHelix changes the Height parameter to the spreadsheet...
- Fri Apr 19, 2024 10:49 pm
- Forum: Help on using FreeCAD
- Topic: Problem making simple cut work (Part WB, Helix)
- Replies: 7
- Views: 366
Re: Problem making simple cut work (Part WB, Helix)
@edwilliams16
Thanks, that worked.
I'd still like to understand why the part cut failed with the corrected sweep attached below.
Thanks, that worked.
I'd still like to understand why the part cut failed with the corrected sweep attached below.
- Fri Apr 19, 2024 9:52 pm
- Forum: Help on using FreeCAD
- Topic: Problem making simple cut work (Part WB, Helix)
- Replies: 7
- Views: 366
Re: Problem making simple cut work (Part WB, Helix)
Thanks. Check geometry pointed out the profile sweeping the helix self intersectedchrisb wrote: ↑Fri Apr 19, 2024 9:11 pm Forum is too slow to get your file.
Did you follow all the "Tipps for success" in the Thread for Screw Tutorial?
- Fri Apr 19, 2024 8:00 pm
- Forum: Help on using FreeCAD
- Topic: Problem making simple cut work (Part WB, Helix)
- Replies: 7
- Views: 366
Problem making simple cut work (Part WB, Helix)
I thought I knew how to do this once upon a time. Trying to make an odd-sized nut, so a hex solid with a helix-generated solid cut out. In the attached, file, using Part WB selecting GateHangerNut and Sweep, then doing a boolean cut results in an object, but the object has no threads. Viewing from t...