Son of a gun. I had, and the whole thing moved but for some reason that didn't register as the issue in my head. I assumed it was that diagonal since that is what highlighted when I clicked the "1 degree".
Thank you
Search found 15 matches
- Tue Mar 12, 2019 12:23 pm
- Forum: Help on using FreeCAD
- Topic: Missing constraint.
- Replies: 2
- Views: 361
- Tue Mar 12, 2019 12:06 pm
- Forum: Help on using FreeCAD
- Topic: Missing constraint.
- Replies: 2
- Views: 361
Missing constraint.
OS: Debian GNU/Linux 9 (stretch) Word size of OS: 64-bit Word size of FreeCAD: 64-bit Version: 0.18.15900 (Git) AppImage Build type: Release Branch: master Hash: a73b10203ab1cb31df4a8763b050d64da8e81580 Python version: 3.6.7 Qt version: 5.6.2 Coin version: 4.0.0a OCC version: 7.3.0 Locale: English/U...
- Thu Feb 07, 2019 9:39 pm
- Forum: Help on using FreeCAD
- Topic: BRep_API: command not done - When doing a thickness
- Replies: 14
- Views: 3939
Re: BRep_API: command not done - When doing a thickness
Another example in your "bottomBodyEdge" sketch. The top line suffer the same issue as above. It's a bit different for the left line. Here the 2 endpoints are set coincident to external geometry points, but the line is also set as vertical. This is indeed redundant as fixing the endpoints...
- Thu Feb 07, 2019 7:47 pm
- Forum: Help on using FreeCAD
- Topic: BRep_API: command not done - When doing a thickness
- Replies: 14
- Views: 3939
Re: BRep_API: command not done - When doing a thickness
I think I understand most of what has been said here.
The only part I'm not clear on is the over constraint portion. I only constrain until I have 0 degrees left. I'm not sure what I'm doing wrong? I try to follow the guidelines I've read. Less is better, use symmetry etc.
The only part I'm not clear on is the over constraint portion. I only constrain until I have 0 degrees left. I'm not sure what I'm doing wrong? I try to follow the guidelines I've read. Less is better, use symmetry etc.
- Thu Feb 07, 2019 1:25 pm
- Forum: Help on using FreeCAD
- Topic: BRep_API: command not done - When doing a thickness
- Replies: 14
- Views: 3939
Re: BRep_API: command not done - When doing a thickness
Hi, Below is what I get when I just recompute all your project (with a 0.18 release) : cam.png All your sketches are either redundantly or over constrained. This should be corrected first. Also I would advise to apply fillets as latest operations as it is quite sensitive. To achieve your hallow sha...
- Thu Feb 07, 2019 1:17 pm
- Forum: Help on using FreeCAD
- Topic: BRep_API: command not done - When doing a thickness
- Replies: 14
- Views: 3939
Re: BRep_API: command not done - When doing a thickness
You can add a smaller rectangle inside the Sketches named "bottomBodyEdge" and "Sketch003" to create the void. I wasn't able to get the Part WB > Thickness tool to work either. Thank you bejant. I had just started to do that figuring why not just pad the correct shape to begin w...
- Thu Feb 07, 2019 1:58 am
- Forum: Help on using FreeCAD
- Topic: BRep_API: command not done - When doing a thickness
- Replies: 14
- Views: 3939
BRep_API: command not done - When doing a thickness
I've seen some info on this error but mostly related to fillets. In the attached file I'm just trying to do a thickness inward of 2.5 mm on faceds 33 and 17. This has worked in the past, though in the past I had built the additive loft portion first and worked from there. How can I accomplish/fix th...
- Mon Feb 04, 2019 4:46 pm
- Forum: Help on using FreeCAD
- Topic: Crash after changing sketch constraint.
- Replies: 13
- Views: 1491
Re: Crash after changing sketch constraint.
Ok so I should not be using the datum planes? I really wasn't sure. I watched a few tutorials where it said to use them, then others where it wasn't. So should I not use one if I'm just putting a new sketch on an existing plane? Datum planes can be very useful for two primary reasons. First, they c...
- Mon Feb 04, 2019 1:18 am
- Forum: Help on using FreeCAD
- Topic: Crash after changing sketch constraint.
- Replies: 13
- Views: 1491
Re: Crash after changing sketch constraint.
All those datum planes are essentially useless because they merely attach to the previous elements. The model is therefore quite fragile. Gene Ok so I should not be using the datum planes? I really wasn't sure. I watched a few tutorials where it said to use them, then others where it wasn't. So sho...
- Sun Feb 03, 2019 11:56 pm
- Forum: Help on using FreeCAD
- Topic: Crash after changing sketch constraint.
- Replies: 13
- Views: 1491
Re: Crash after changing sketch constraint.
Ahhh ok. I was going to ask that, if the fillets should all be done at the end.
Is there anything else like that? Is there like a best practices sort of thing around I should read?
Thank you much.
Is there anything else like that? Is there like a best practices sort of thing around I should read?
Thank you much.