Search found 15 matches

by oldspotty
Fri Jul 19, 2019 11:46 am
Forum: Open discussion
Topic: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Replies: 22
Views: 2360

Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error

Hi @chrisb
there is no code in my post,
only a text capture from the screen of my PC system settings as displayed using the 'Speccy' utility.
I dumped it as @sgrogan requested more info about my PC set-up and I thought he may as well have the lot !
cheers,
by oldspotty
Fri Jul 19, 2019 12:40 am
Forum: Open discussion
Topic: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Replies: 22
Views: 2360

Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error

CPU AMD A10-7700K Cores 4 Threads 4 Name AMD A10-7700K Code Name Kaveri Package Socket FM2+ (906) Technology 28nm Specification AMD A10-7700K Radeon R7, 10 Compute Cores 4C+6G Family F Extended Family 15 Model 0 Extended Model 30 Stepping 1 Revision KV-A1 Instructions MMX (+), SSE, SSE2, SSE3, SSSE...
by oldspotty
Fri Jul 19, 2019 12:31 am
Forum: Open discussion
Topic: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Replies: 22
Views: 2360

Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error

From 'Speccy' : Graphics Monitor 1 Name PLE2483H on AMD Radeon R7 Graphics [i].. . . (Iiyama display)[/i] Current Resolution 1920x1080 pixels Work Resolution 1920x1027 pixels State Enabled Multiple displays Extended, Primary, Enabled Monitor Width 1920 Monitor Height 1080 Monitor BPP 32 bits per pix...
by oldspotty
Fri Jul 19, 2019 12:00 am
Forum: Open discussion
Topic: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Replies: 22
Views: 2360

Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error

Hi @sgrogan I just tried the version you sent me and sadly I have to report it exhibits the bug. Here is a screenshot after I changed the transparency : CropperCapture[418].jpg I re-checked the 12.1.12 version and still no problem with that ( I began to doubt myself so thought I should re-check !) h...
by oldspotty
Thu Jul 18, 2019 11:07 pm
Forum: Open discussion
Topic: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Replies: 22
Views: 2360

Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error

@sgrogan no problem. I only discovered FreeCAD yesterday morning and it seems a very impressive bit of software, but I ran into a problem when trying to follow the beginners' tutorial on YouTube so thought I'd better report it ! If you'd like me to test future builds for this bug, I'd be happy to do...
by oldspotty
Thu Jul 18, 2019 10:20 pm
Forum: Open discussion
Topic: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Replies: 22
Views: 2360

Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error

Hi @Syres and @Kisolre. thanks again for your attention. I have tested 3 alternative builds and all are OK - none of them exhibit my reported bug when applying transparency to a primitive cube. FYI, the versions I tested successfully without the fault were : * FreeCAD_0.18.16110_LP_11.11_PY2QT4-WinV...
by oldspotty
Thu Jul 18, 2019 5:43 pm
Forum: Open discussion
Topic: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Replies: 22
Views: 2360

Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error

The version listed under assets for 0.18.2 is revision 16117 which is the one I have already installed & which has the bug.
Feel free to correct me if I am wrong as I am a beginner with this !
I think I may be able to try the v19 software . . I will try when I have afree moment !

cheers.
by oldspotty
Thu Jul 18, 2019 5:35 pm
Forum: Open discussion
Topic: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Replies: 22
Views: 2360

Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error

Thanks again.

I will read the various articles about graphics cards that you suggest.
I came here because I had already read the bug submission guidelines & process. :-)

Thanks for help.
best regards.