It means the mesh was not manifold to begin with.
You could try a Part WB Refine on the shape (this is a guess...never tried it).
Did you use the Mesh workbench Analyze and Repair to check the mesh.
If the mesh bad enough you may not be able to repair it.
Search found 8974 matches
- Mon Apr 15, 2024 10:35 am
- Forum: Help on using FreeCAD
- Topic: How to union, intersect, etc on STL files in Part WB?
- Replies: 4
- Views: 391
- Mon Apr 15, 2024 9:53 am
- Forum: Help on using FreeCAD
- Topic: Regression on Sketcher Points
- Replies: 7
- Views: 456
Re: Regression on Sketcher Points
Not a regression, but a change to the behavior.
- Sun Apr 14, 2024 3:57 pm
- Forum: Help on using FreeCAD
- Topic: Draft workbench
- Replies: 7
- Views: 420
Re: Draft workbench
Yes I am comfortable with the Sketcher WB. and have completed some good CAD & some CAM work with it. But I cannot figure the purpose of the Draft WB if you cannot, other than primitively, simply 2D draft with it? Does it have a significance I have not realised? I am genuinely new to Freecad hav...
- Sun Apr 14, 2024 3:23 pm
- Forum: Help on using FreeCAD
- Topic: Draft workbench
- Replies: 7
- Views: 420
Re: Draft workbench
Had a go at using the Draft workbench. Have been using CAD for more than 45 years with many different programmes, but I could not find a way to do simple 2d drawings which required basic tangent lines or snapping to tangent, for instance. I seemed to require the normal FC constraints as I am quite ...
- Sun Apr 14, 2024 11:27 am
- Forum: Help on using FreeCAD
- Topic: How to union, intersect, etc on STL files in Part WB?
- Replies: 4
- Views: 391
Re: How to union, intersect, etc on STL files in Part WB?
You first need to confirm the mesh is manifold with the tools in Mesh workbench. And possibly decimate it the mesh to minimize the triangles. Then use Part workbench Create shape from mesh. Then confirm the shape is valid with Part workbench Check geometry (with BOP check enabled) to confirm the sha...
- Sat Apr 13, 2024 4:46 pm
- Forum: Help on using FreeCAD
- Topic: Appearance settings don't work in dev build
- Replies: 1
- Views: 218
Appearance settings don't work in dev build
In build 36807 and 36822 Appearance settings don't work.
Same for attempts to set appearance from Properties View tab.
Same for attempts to set appearance from Properties View tab.
- Sat Apr 13, 2024 10:56 am
- Forum: Open discussion
- Topic: [REQ] This is a formal request to support the USD format
- Replies: 18
- Views: 1233
Re: [REQ] This is a formal request to support the USD format
... I already have all that AFAICT. A few Sverchok nodes in Blender and I can read (and write) FreeCAD .FCStd file directly. Update from a changed FC file happens with a single click. (Note: the Sverchok FC node code open source, so could serve as an example for anyone wishing to read FC files into...
- Sat Apr 13, 2024 10:23 am
- Forum: Help on using FreeCAD
- Topic: When working with 2 documents, unexpected switch from one to the other
- Replies: 45
- Views: 4025
Re: When working with 2 documents, unexpected switch from one to the other
Have you tried changing the overlay properties in Preferences? Or, disabling overlays?
- Fri Apr 12, 2024 8:45 pm
- Forum: Help on using FreeCAD
- Topic: [Solved] Reusing sketches
- Replies: 3
- Views: 418
Re: Reusing sketches
Create the sketch, then use Shapebinder or Subshapebinder for each Body.
The binder can be use in a Pad/Pocket/etc. feature.
The binder can be use in a Pad/Pocket/etc. feature.
- Fri Apr 12, 2024 7:32 pm
- Forum: Open discussion
- Topic: Feature request - Sketch creation
- Replies: 6
- Views: 339
Re: Feature request - Sketch creation
What you describe has been discussed at length many times. There are existing feature requests and there is at least an effort to review the possibility of refactoring so that experience is better. But, the Create sketch in Sketcher toolbar and Part Design toolbar create the sketch with different pr...