So deep integration with PG would be great! :) Hope to see it one day. However for experimenting with new database-centered workflows we need very modest level of integration: just ability to somehow keep and retrieve FCStd file contents in database records with some custom fields. 1. It seems that...

by jmmartin » Fri Sep 18, 2020 6:58 pm Hi I'm new to A2Plus, I don't know if this is correct place to ask for help (sorry if not). Im not being able to find correct constraints to put the selected part centered to the holes. coliso.png jmmartin, the place is right. In your case: holes on the hook s...

Roy, thank you for attention, sorry that my ground is "barren", hopefully - not completely. Began studying advised solutions. One of suggestions - over sized detail + Part_Cut... Does it work as "Trim"? It seems, that actual "trim" is available only in: -- Draft([Draft_Trimex|Trim/Extend (Trimex)]] ...

If this does not require too much effort, could you please give an advise: need to make a fence on a slope of 4/360 degree. The fence consists of sections Single section is a frame between two posts. The post is a vertical profile 60x60x1300 The lower and upper of frame is a 4 degree sloped profile ...

Made a correction

Want to try to improve / change/upgrade some tools/buttons from tool-bar How to find the implementation code based on the name/comment of the tool-bar button? In particular - the [Arch/BIM: Path Array] elevates the pattern from the base-face. See here: https://forum.freecadweb.org/viewtopic.php?f=3&...

The sketch is positioned with an offset to wire...
But still for a path-related tool - changing the plane instead of aligning to path seems strange.

Tried to make a fence by using an array and [copy-along-path:] Array acts as expected. But the [copy-along-path] tool - adds additional elevation at Z-axis: See pictures. Pictures are done in "normal" conditions: initial situation and a view immediately after click. Before_Array.png BIM_1b-Array_Aft...

In my vision ( seems now to be wrong) - in windows there are several disk usage cases: 1. RAM caching - being solved at system level 2. dll loading to RAM 3. temporary files 4. present files packing-to/extracting-from archive - may sometimes be done in parallel with the proceeding work in the GUI. (...

Does FC use/have an option to load completely to the RAM, or it works from disk? Nowadays, when the amount of RAM is usually above 4Gb - would be more efficient, If FC would load the it's "kernel" and currently used workbenches to the RAM. Another option would be to run it from "RAM-disk" But the qu...