Search found 258 matches
- Tue Apr 09, 2024 11:16 pm
- Forum: Path/CAM
- Topic: 3D Pocket not touch bottom and walls
- Replies: 15
- Views: 740
Re: 3D Pocket not touch bottom and walls
Hi try to make cut with 6mm ball mill with 8mm diameter(half) groove. Simulations show that mill not touch bottom and walls I have no matterial allowance, step down 0,1mm and step over 1% Also need to extend trajectory. Almost same situation like in post https://forum.freecad.org/viewtopic.php?t=86...
- Tue Apr 09, 2024 10:09 pm
- Forum: Path/CAM
- Topic: Paths : Cutting out squares
- Replies: 4
- Views: 336
Re: Paths : Cutting out squares
Hello everyone, I have a 150mm x 150mm pieces of wood that I want to cut out 25 (5x5) squares from. I was hoping to use the existing walls of the stock wood. However when I set it up in freecad it seems like it tries to cut all edges no matter what. your shape is a closed square set to cut the outs...
- Tue Apr 02, 2024 4:16 am
- Forum: Path/CAM
- Topic: Path experimental on 0.21.2 fails: camotics `GLIBC_2.33' not found
- Replies: 9
- Views: 633
Re: Path experimental on 0.21.2 fails: camotics `GLIBC_2.33' not found
I'd like to test thread milling. I have edited my original reply since downloading the version you have. I do not get those errors with following settings. Check Edit -> Preferences -> Path -> Advanced, Enable OCL dependent features should be checked. both EnableAdvancedOCLFeatures -> true EnableEx...
- Wed Mar 27, 2024 11:09 pm
- Forum: Path/CAM
- Topic: Postprocessor Beamicon 2
- Replies: 12
- Views: 2597
Re: Postprocessor Beamicon 2
Hello knowledgeable people, i am new to this forum and need help with the beamicon 2 Post Processor. It stoppt working when i installed the 21 Version. The error is: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/green/.local/share/FreeCAD/Macro/beamicon2_post.py", line 32, in <module...
- Tue Mar 26, 2024 7:35 am
- Forum: Path/CAM
- Topic: Unable to surface mill a face
- Replies: 6
- Views: 512
Re: Unable to surface mill a face
However, when I run it in the simulator, it does nothing, and looking at the gcode output, there's nothing there apart from the start/end stuff, as below: From my test it seems there may be a problem with the original job creation. If I re-enter the Final Depth OR the Step Down values in the Setup ...
- Sat Mar 23, 2024 10:34 pm
- Forum: Path/CAM
- Topic: What is .ncp file from isy-cam software and can FreeCAD path export .ncp?
- Replies: 4
- Views: 379
Re: What is .ncp file from isy-cam software and can FreeCAD path export .ncp?
https://www.isel.com/hu/mwdownloads/download/link/id/4294/ PLANE XY ;set the interpolation plane MOVEABS X50000 Y50000 Z-2500 ;move to start point CWREL I20000 J0 X0 Y0 Z0 A0 ;circle r = 20 mm MOVEABS X50000 Y50000 Z-2500 ;this command causes the CWREL I20000 This is obviously non standard gcode (n...
- Sat Mar 23, 2024 9:52 pm
- Forum: Path/CAM
- Topic: What is .ncp file from isy-cam software and can FreeCAD path export .ncp?
- Replies: 4
- Views: 379
Re: What is .ncp file from isy-cam software and can FreeCAD path export .ncp?
Hi, Anyone know what is .ncp and can FreeCAD export it? Thanks. Are you able to able to supply a sample of the .ncp file structure / output ? Upload via the Attachments tab when creating a post here , you will need to rename it to have the ",txt " extension for attachment to accept it . M...
- Wed Mar 20, 2024 10:20 pm
- Forum: Path/CAM
- Topic: Misalignment between stock and model when selecting origin on stock model
- Replies: 2
- Views: 272
Re: Misalignment between stock and model when selecting origin on stock model
Hi, so, I have this problem both in 0.22.0dev and 0.21.2. Selecting origin on a stock model produces a misalignment between the stock and the model. STEPS TO REPRODUCE -Open Job dialog -> Setup - Stock panel -> Use Existing Solid , and select the stock body in the dropdown. I can not confirm if thi...
- Wed Feb 21, 2024 5:24 am
- Forum: Path/CAM
- Topic: Making 3D Surface more efficient
- Replies: 45
- Views: 3247
Re: Making 3D Surface more efficient
Thanks, I'm using Version: 0.22.0dev.35525 so I should be able to drop this straight in. However, I can't find the 3DSurface tool any more on the new re-arranged menus, all I see is 3Dpocket. 3Dsurface and waterline seem to have disappeared. Can you tell me where to find it ? Check if "Enable ...
- Wed Feb 21, 2024 5:17 am
- Forum: Path/CAM
- Topic: All material not removed in dado
- Replies: 2
- Views: 387
Re: All material not removed in dado
Hello, The two green lines show the proper spacing for a 1/8 inch endmill from the top and bottom edges of the dado, but the spacing between them allows uncut material. Any ideas what is causing this, and how to correct for it? The spacing between the path lines does not allow for another set of pa...