Search found 53193 matches
- Thu Apr 18, 2024 4:10 pm
- Forum: Help on using FreeCAD
- Topic: Rotation about LCS and Dataplanes
- Replies: 4
- Views: 153
Re: Rotation about LCS and Dataplanes
It's still unclear to me what you want. If you would rotate the existing sketch around the shortest edge, then the whole edge would move out of place due to the external geometry which it has. Sidenote: You should use there the sketch edge rather than the generated pad. If you want to keep that shor...
- Thu Apr 18, 2024 2:33 pm
- Forum: Help on using FreeCAD
- Topic: Equal constraint can't be applied to mirrored slot arcs right away
- Replies: 1
- Views: 112
Re: Equal constraint can't be applied to mirrored slot arcs right away
Looks like a bug. And I would say you are experienced enough to not have done other fancy things to the sketch. You may upload the file anyway.
- Thu Apr 18, 2024 2:31 pm
- Forum: Help on using FreeCAD
- Topic: Rotation about LCS and Dataplanes
- Replies: 4
- Views: 153
Re: Rotation about LCS and Dataplanes
You don't need a LCS to rotate a sketch and even worse, you cannot rotate a sketch around a LCS, which is attached to the sketch itself, that would cause a cyclic dependency.
Solution: Delete the LCS, rotate the sketch directly.
Solution: Delete the LCS, rotate the sketch directly.
- Thu Apr 18, 2024 1:51 pm
- Forum: Help on using FreeCAD
- Topic: Problem with trimming custom helical thread
- Replies: 4
- Views: 214
Re: Problem with trimming custom helical thread
Better ask here right away. You should let the helix go further up and add the last groove later. For a better runout add another angled helix at the top. To use the helices inside of a body, use always a ShapeBinder or - in this case, where you combine multiple objects - a SubShapeBinder. SnipScree...
- Thu Apr 18, 2024 11:54 am
- Forum: Forum in Deutsch
- Topic: Neue CPU? Benötige mal einen Vergleich an einem STL-Modell
- Replies: 44
- Views: 1606
Re: Neue CPU? Benötige mal einen Vergleich an einem STL-Modell
das ist eine interessante messung, demnach ist 0.22 schneller als 0.21 Auf einem Rechner laufen so viele Prozesse, dass ich das bei diesem kleinen Unterschied erst nach einem ganzen Haufen von Messungen zu sagen wagen würde. Wenn aus 0.22 die 1.0 wird, ist zu befürchten, dass die Performance noch m...
- Thu Apr 18, 2024 11:51 am
- Forum: Open discussion
- Topic: Is it intentional that LinearPattern's "occurences" parameter includes the original features but the "length" doesn't?
- Replies: 5
- Views: 367
Re: Is it intentional that LinearPattern's "occurences" parameter includes the original features but the "length" doesn'
Perhaps it would make sense to make the documentation clearer I updated the docs. It says now Specify the Length from the start of the first occurrence to the start of the last occurrence. It would be even more precise to say Specify the Length from an arbitrary point of the first occurrence to the...
- Thu Apr 18, 2024 11:41 am
- Forum: Help on using FreeCAD
- Topic: Problem with trimming custom helical thread
- Replies: 4
- Views: 214
Re: Problem with trimming custom helical thread
@papyblaise, Newbies can attach files to a post (well, if they can).
@oliof, Follow the IMPORTANT link above and find out how to attach things.
@oliof, Follow the IMPORTANT link above and find out how to attach things.
- Thu Apr 18, 2024 8:22 am
- Forum: Help on using FreeCAD
- Topic: May I ask how to project the side of the column pedestal to the XY plane
- Replies: 6
- Views: 367
Re: May I ask how to project the side of the column pedestal to the XY plane
Moved to Help forum.
- Thu Apr 18, 2024 8:19 am
- Forum: Help on using FreeCAD
- Topic: Loft issues in newer daily builds
- Replies: 4
- Views: 281
Re: Loft issues in newer daily builds
The circles don't have to be segmented in this case. It works if the middle sketch is just a single circle. You may retry with a circle divided in 8 segments, so it will match the number of elements in the rectangular sketch.
- Thu Apr 18, 2024 7:57 am
- Forum: Help on using FreeCAD
- Topic: pocket in custom shape
- Replies: 3
- Views: 289
Re: pocket in custom shape
question, how did you know which points needed to be tangent? noticed you only created 2 constraints for tangent. did you have to check point by point? I just looked at it :) . B-Splines were made to be smooth, so here it where the ends which weren't connected tangentially. also, what is that funky...