Search found 33888 matches

Go to advanced search

by chrisb
Tue May 11, 2021 6:50 am
Forum: Help on using FreeCAD
Topic: Sketches get corrupt on parametric changes
Replies: 1
Views: 5

Re: Sketches get corrupt on parametric changes

Please add the information at which values the sketch flips, so that not every helper has to invest the time to find out.
by chrisb
Tue May 11, 2021 6:45 am
Forum: Help on using FreeCAD
Topic: "BRep_API: command not found" when applying thickness
Replies: 2
Views: 22

Re: "BRep_API: command not found" when applying thickness

Here is the best I can do for you: I used a sweep to get a thicker wall. Please note that the sweep does not pass the Part geometry check, which means that problems can occur if you use such object in further operations, e.g. booleans. So I wasn't able to make a union of the wall with the bottom. Sn...
by chrisb
Tue May 11, 2021 6:25 am
Forum: Help on using FreeCAD
Topic: "BRep_API: command not found" when applying thickness
Replies: 2
Views: 22

Re: "BRep_API: command not found" when applying thickness

Hi and welcome to the forum! Thickness is perhaps the function that fails most often in FreeCAD. This come directly from the 3rd party geometric kernel, and there is not much that the FreeCDA developers can do about it. It almost always fails when curved shapes are involved that are controlled by so...
by chrisb
Mon May 10, 2021 11:27 pm
Forum: Path/CAM
Topic: Acorn Router Pro CNC software 4.46v & FreeCAD 0.19v
Replies: 6
Views: 295

Re: Acorn Router Pro CNC software 4.46v & FreeCAD 0.19v

Aethenelle wrote:
Mon May 10, 2021 10:51 pm
The centroid post-processor seems to be the most correct of the bunch but I don't know if modifying it as Acorn CNC expects would affect other Centroid products.
You can modify it and store it under a new name, e.g. acorn_post.py.
by chrisb
Mon May 10, 2021 7:53 pm
Forum: Help on using FreeCAD
Topic: [SOLVED] The use of non-solids for booleans when parts appear solid?
Replies: 6
Views: 240

Re: The use of non-solids for booleans when parts appear solid?

sevalecan wrote:
Mon May 10, 2021 6:15 pm
if I'm motivated enough I will try to write up a guide on a few of these pitfalls because it doesn't seem to be information I have managed to run across yet.
I hope you are motivated. You may add additional things to consider to the "Tips" section of the Thread for Screw Tutorial.
by chrisb
Mon May 10, 2021 7:49 pm
Forum: Forum in Deutsch
Topic: Post-Processor für KOSY Koordinatentische?
Replies: 30
Views: 1996

Re: Post-Processor für KOSY Koordinatentische?

freecad-samuel wrote:
Mon May 10, 2021 7:44 pm
Gibt es eine Möglichkeit aus FreeCAD G-Code für die KOSY zu eyportieren? Und wie wäre das Vorgehen?
So wie im Wiki beschrieben: Path Postprocessor Customization.
by chrisb
Mon May 10, 2021 7:47 pm
Forum: Developers corner
Topic: Bug in Start workspace
Replies: 2
Views: 78

Re: Bug in Start workspace

Hi Heewa, welcome in the forum and thanks for introducing yourself with an improvement of FreeCAD!
by chrisb
Mon May 10, 2021 7:41 pm
Forum: Forum in Deutsch
Topic: Datum Linie lotrecht zu einer beliebigen Fläche, Sizze oder Datum Fläche
Replies: 22
Views: 633

Re: Datum Linie lotrecht zu einer beliebigen Fläche, Sizze oder Datum Fläche

Ich habe es nicht geschafft die Schraege_Bohrung_Fixierung_DatumPlane001 um die Dicke des Hilfspads + die gewünschte Schräge und dann noch um die 90 Grad in einem rutsch zu drehen. Ginge das überhaupt? Kleinere Schritte sind keine Schande Ich musste den Zwischenschritt über Hilfspad_und_Schraege_Da...
by chrisb
Mon May 10, 2021 6:25 pm
Forum: Forum in Deutsch
Topic: Dampflokgestänge animieren mit A2Plus Workbench?
Replies: 8
Views: 301

Re: Dampflokgestänge animieren mit A2Plus Workbench?

Hier ist eine etwas verbesserte Version, die insbesondere einfacher zu bedienen ist: - Namenspräfix eingeben bis der richtige Eintrag gefunden wurde, - Tab-Taste, um zum Button zu kommen - Leertaste zum Übernehmen Außerdem habe ich noch ein paar Nutzer hinzugefügt, wie z.B. Chris Hennes als begnadet...
by chrisb
Mon May 10, 2021 6:18 pm
Forum: Users Showcase
Topic: MOTOR ESTRELLA
Replies: 1
Views: 153

Re: MOTOR ESTRELLA

Can you give some information how you modeled it, workbenches used, suggestions for success?

Go to advanced search