Do you mean a reply in an existing thread ? It may stay rather slow generally due to that check for new replies. To be precise: - clicking the reply button in an existing topictakes right now < 1sec. (- writing the reply takes some minutes, sometimes many of them) - confirming with "Submit&quo...

Aah, thanks; that list.

martinhgps wrote: ↑Tue Apr 16, 2024 5:40 pm Assembly4 and Assembly are the same?

No, Assembly is the new builtin assembly workbench. I'm not really familiar with either of them, but I would say, that the builtin is not yet on par with Assembly4. As Assembly is builtin, it may be the dominant workbench on the long run.

Ich dachte eigentlich, daß ich in der Part WB den ganzen Body und das Array ausgewählt habe. Dann hattest Du die falsche Datei hochgeladen. So sieht Pad_Innengewinde4 aus: SnipScreenshot-3ddfc5.png Ich verwende für so etwas aber auch lieber Part Cut. Insbesondere, wenn man mehrere Bodys mit Boolean...

Hi and welcome to the forum!

I'm not sure if this is the right place. Is this a general or rather a Python question? In the latter case, I can move it to the Python forum.

Barum wrote: ↑Tue Apr 16, 2024 4:42 pm Yes, what I meant by "sharing edge" is when chamfer edge and face edge or edges overlap.

It's still unclear to me. Can you give an example?

martinhgps wrote: ↑Tue Apr 16, 2024 4:42 pm Hi, a2plus vs Assembly4, Which one is better?

What is "better"? If you look at the usage and the models created - e.g. from ppemawm - then it is probably Assembly4 which has more advantages.

I have approved this topic, but I do have some serious doubts: is this spam, is this fake? I'm not at all sure about this either: The only thing shown about the company is an email account; no person, no adress, perhaps not registered with anything official. Perhaps they are from Delaware. Perhaps ...

Chris. Per my attachment, on the right I have done the centering as you suggested--using symmetries appointed by the global axis. Later, I similarly need to center the sketch and the solid on the left. I no longer have my symmetric axis. How would I do this without construction lines or some means ...

Merkwürdigkeiten mit PartDesign-Boolean: - Bei geöffnetem PartDesign-Boolean-Dialog kann ich das Array gar nicht hinzufügen. - Wenn ich es vorher auswähle, stehen das Array und der Fastener in der Liste: SnipScreenshot-604f9f.png - Wenn ich den Fastener entferne, ist alles gut und auch das Bestätige...