Search found 53195 matches
- Thu Apr 18, 2024 4:45 pm
- Forum: Open discussion
- Topic: Feature request: Remove Torus from Part workbenchs Solids toolbar
- Replies: 0
- Views: 5
Feature request: Remove Torus from Part workbenchs Solids toolbar
Would it be sensible to remove the Torus from the Part toolbar? It is very rarely used and is still available with the other primitives such as Ellipsoid, Prism, etc. via Part Primitives . It could of course remain available in the menu, where we may consider to add for consistency reasons the ellip...
- Thu Apr 18, 2024 4:35 pm
- Forum: Open discussion
- Topic: Is it intentional that LinearPattern's "occurences" parameter includes the original features but the "length" doesn't?
- Replies: 6
- Views: 384
Re: Is it intentional that LinearPattern's "occurences" parameter includes the original features but the "length" doesn'
@Roy_043 you are the main contributor to PartDesign LinearPattern. Any preferences?
- Thu Apr 18, 2024 4:10 pm
- Forum: Help on using FreeCAD
- Topic: Rotation about LCS and Dataplanes
- Replies: 6
- Views: 176
Re: Rotation about LCS and Dataplanes
It's still unclear to me what you want. If you would rotate the existing sketch around the shortest edge, then the whole edge would move out of place due to the external geometry which it has. Sidenote: You should use there the sketch edge rather than the generated pad. If you want to keep that shor...
- Thu Apr 18, 2024 2:33 pm
- Forum: Help on using FreeCAD
- Topic: Equal constraint can't be applied to mirrored slot arcs right away
- Replies: 1
- Views: 115
Re: Equal constraint can't be applied to mirrored slot arcs right away
Looks like a bug. And I would say you are experienced enough to not have done other fancy things to the sketch. You may upload the file anyway.
- Thu Apr 18, 2024 2:31 pm
- Forum: Help on using FreeCAD
- Topic: Rotation about LCS and Dataplanes
- Replies: 6
- Views: 176
Re: Rotation about LCS and Dataplanes
You don't need a LCS to rotate a sketch and even worse, you cannot rotate a sketch around a LCS, which is attached to the sketch itself, that would cause a cyclic dependency.
Solution: Delete the LCS, rotate the sketch directly.
Solution: Delete the LCS, rotate the sketch directly.
- Thu Apr 18, 2024 1:51 pm
- Forum: Help on using FreeCAD
- Topic: Problem with trimming custom helical thread
- Replies: 4
- Views: 217
Re: Problem with trimming custom helical thread
Better ask here right away. You should let the helix go further up and add the last groove later. For a better runout add another angled helix at the top. To use the helices inside of a body, use always a ShapeBinder or - in this case, where you combine multiple objects - a SubShapeBinder. SnipScree...
- Thu Apr 18, 2024 11:54 am
- Forum: Forum in Deutsch
- Topic: Neue CPU? Benötige mal einen Vergleich an einem STL-Modell
- Replies: 44
- Views: 1626
Re: Neue CPU? Benötige mal einen Vergleich an einem STL-Modell
das ist eine interessante messung, demnach ist 0.22 schneller als 0.21 Auf einem Rechner laufen so viele Prozesse, dass ich das bei diesem kleinen Unterschied erst nach einem ganzen Haufen von Messungen zu sagen wagen würde. Wenn aus 0.22 die 1.0 wird, ist zu befürchten, dass die Performance noch m...
- Thu Apr 18, 2024 11:51 am
- Forum: Open discussion
- Topic: Is it intentional that LinearPattern's "occurences" parameter includes the original features but the "length" doesn't?
- Replies: 6
- Views: 384
Re: Is it intentional that LinearPattern's "occurences" parameter includes the original features but the "length" doesn'
Perhaps it would make sense to make the documentation clearer I updated the docs. It says now Specify the Length from the start of the first occurrence to the start of the last occurrence. It would be even more precise to say Specify the Length from an arbitrary point of the first occurrence to the...
- Thu Apr 18, 2024 11:41 am
- Forum: Help on using FreeCAD
- Topic: Problem with trimming custom helical thread
- Replies: 4
- Views: 217
Re: Problem with trimming custom helical thread
@papyblaise, Newbies can attach files to a post (well, if they can).
@oliof, Follow the IMPORTANT link above and find out how to attach things.
@oliof, Follow the IMPORTANT link above and find out how to attach things.
- Thu Apr 18, 2024 8:22 am
- Forum: Help on using FreeCAD
- Topic: May I ask how to project the side of the column pedestal to the XY plane
- Replies: 6
- Views: 367
Re: May I ask how to project the side of the column pedestal to the XY plane
Moved to Help forum.