user1234 wrote: ↑Thu Apr 18, 2024 9:10 pm a torus is very common primitive for e.g. o-rings.

Good example.

drmacro wrote: ↑Thu Apr 18, 2024 6:41 pm Is there a reason not to use it?

No not really - except perhaps when you want to stick to the core system.

Oh these horrible gifs where I never know where they start. I cannot confirm your issue, but I found a different one: - open your sketch - select both left arcs - apply equality -> the sketch is shown as overconstrained with the newly applied equality said to be redundant. The phenomenon vanishes if...

Is it possible to change just the white backgroundcolor of the TreeView and the property view to a light grey without changing the whole theme? I want to include some screenshots in a pdf, and a color different from the white background would be appreciated.

This could be a good application for a master sketch: tha master has just the square outline. You reference it from a sketch where you later delete some geometry, replace linmes by arcs, ar add new things. The other sketch also references the master, which must be simple enough to not receive struct...

Would it be sensible to remove the Torus from the Part toolbar? It is very rarely used and is still available with the other primitives such as Ellipsoid, Prism, etc. via Part Primitives . It could of course remain available in the menu, where we may consider to add for consistency reasons the ellip...

@Roy_043 you are the main contributor to PartDesign LinearPattern. Any preferences?

It's still unclear to me what you want. If you would rotate the existing sketch around the shortest edge, then the whole edge would move out of place due to the external geometry which it has. Sidenote: You should use there the sketch edge rather than the generated pad. If you want to keep that shor...

Looks like a bug. And I would say you are experienced enough to not have done other fancy things to the sketch. You may upload the file anyway.

You don't need a LCS to rotate a sketch and even worse, you cannot rotate a sketch around a LCS, which is attached to the sketch itself, that would cause a cyclic dependency.

Solution: Delete the LCS, rotate the sketch directly.